
The Atex Battery Box BB_FG24V18A is a sealed, explosion-protected 24 V DC power module designed for places where gas or dust could ignite. It combines a robust 24 V, 18 Ah class battery with a compact, flame-retardant enclosure, fused outputs, and Ex-compatible cable entries. Built for the UAE’s hot, dusty, and coastal conditions, it keeps instruments, beacons, controls, and comms powered safely across Dubai, Sharjah, and Abu Dhabi. Clear labels, glove-friendly hardware, and a tidy internal layout make installation fast and maintenance simple. If you need reliable DC backup or portable 24 V power that passes audits, this Intrinsically Safe Battery Box in Dubai is a smart choice—practical, compact, and compliant.
What is Intrinsically Safe Battery Box in Dubai
An intrinsically safe (IS) or ATEX battery box is a complete DC power solution designed to operate in or near explosive atmospheres when installed according to its certificate. The BB_FG24V18A integrates a sealed 24 V battery with protection hardware inside a flame-retardant enclosure. Ex-rated glands, insulating parts, and fused outputs help control energy, temperature rise, and accidental shorts at the connection points. Unlike open trays, this sealed design blocks vapours and dust from live parts and keeps wiring organized with proper strain relief. For UAE sites—refineries, tank farms, marine yards, utilities, and manufacturing halls—this approach provides clean, auditable power where moving equipment to a safe area is not practical.
Key uses of Intrinsically Safe Battery Box in Dubai
Across Dubai, Sharjah, and Abu Dhabi, teams deploy the BB_FG24V18A as dependable backup for gas detectors, alarms/sirens, access control, PLC/RTU cabinets, CCTV/communications, small 24 V UPS/inverters, and portable inspection lights. The fused outputs speed troubleshooting during shutdowns or night work. Because the enclosure is sealed and clearly marked, technicians can swap units quickly, document compliance, and return systems to service with minimal downtime—ideal for coastal plants and yards exposed to salt-spray and wind-blown sand.
Key applications
Oil & Gas / Petrochemicals: DC backup for analysers, alarms, and Ex communications near process units and loading bays.
Marine & Ports: Dockside systems, pump-room panels, navigation aids exposed to vapours and spray.
Utilities & Water: Telemetry/PLC cabinets, dosing systems, standby lighting in chlorination areas.
Manufacturing / Food & Pharma: Dust-hazard zones with powders/solvents needing sealed 24 V power for sensors and beacons.
Facilities & Emergency Response: Access systems, evacuation lighting, and radios during drills or grid faults.
Why choose Intrinsically Safe Battery Box in Dubai
Choose BB_FG24V18A for safety, uptime, and simplicity. The enclosure and Ex-compatible entries help reduce ignition risk and keep ingress out. Fused outputs and clear terminals reduce wiring errors and speed service. The 24 V, 18 Ah class capacity balances useful runtime with a compact footprint, making it easy to mount on panels, skids, and field kiosks. Built for the UAE climate, it supports faster audits, fewer unplanned stops, and reliable 24 V performance across Dubai, Sharjah, and Abu Dhabi.
Technical Specs of Atex Battery Box BB_FG24V18A
| Item | Specification |
|---|---|
| Model | Atex Battery Box BB_FG24V18A |
| Function | Sealed 24 V DC battery module in Ex-compatible enclosure |
| Nominal Voltage | 24 V DC |
| Capacity Class | 18 Ah (usable capacity depends on load & temperature) |
| Outputs | 1–2 fused DC outputs; user-selectable fuse ratings |
| Protection | Internal fuse/auto-reset breaker options; reverse-polarity & short-circuit protection (variant-dependent) |
| Enclosure | Flame-retardant, sealed housing; gasketed cover; corrosion-resistant hardware |
| Ingress Protection | Up to IP66/IP67 when installed with approved Ex glands |
| Cable Entries | Ex-compatible metric/NPT glands with strain relief and sealing washers |
| Operating Temperature | −20 °C to +55 °C (load and variant dependent) |
| Mounting | Wall/panel brackets; vibration-resistant fixings for skids and enclosures |
| Indicators | Optional status LED/test points (safe-area verification) |
| Serviceability | Low-maintenance; field-swappable unit; clear Ex labelling & wiring map |
| Typical Loads | Gas detectors, beacons/sirens, access control, telemetry/PLC, CCTV/Comms, small UPS/inverters, portable lights |
Certifications, Compliance & Standards
ATEX Directive 2014/34/EU (Equipment for Explosive Atmospheres) – eur-lex
IECEx Certification Scheme – official portal
IEC/EN 60079 Series (Explosive atmospheres; Ex d/Ex e; IS “i”) – IEC webstore
IEC 60529 (IP Code) – ingress protection ratings
IEC 60896 / IEC 60095 (Lead-acid battery performance, if applicable) – IEC webstore
FAQs
1) What’s inside the BB_FG24V18A?
A sealed 24 V 18 Ah class battery, fused outputs, and Ex-compatible cable entries inside a flame-retardant enclosure—ready for compliant DC backup when installed per certificate.
2) Can I mount it outdoors in Dubai’s heat?
Yes—within the specified temperature range and using approved Ex glands to maintain IP66/67. Provide shading/ventilation where possible.
3) How long will it power my device?
Runtime depends on your load (W) and required autonomy (hours). We size usable capacity with margin for UAE temperatures and battery aging.
4) How do I charge it safely?
Most sites charge in a safe area with a compatible charger. Some projects use Ex-rated charging systems—follow the certification scope and site policies.
5) Can I add more fused outputs?
Standard layout supports 1–2 fused outputs; custom layouts are possible if compliant with enclosure space and thermal limits.
6) Is it suitable for dust as well as gas zones?
Yes—variants support gas (Zone 1/2) and dust (Zone 21/22) classifications. Confirm the exact Ex marking and temperature class for your area.
7) What maintenance is required?
Inspect cable glands and gaskets, verify terminal torque, check fuses, and perform periodic load tests. Replace the internal battery per test results or service interval.
Conclusion
The Atex Battery Box BB_FG24V18A gives you a compact, compliant way to supply 24 V DC power in hazardous areas across Dubai, Sharjah, and Abu Dhabi. With a sealed enclosure, fused outputs, and Ex-compatible entries, it reduces risk, speeds maintenance, and stands up to the UAE climate. Choose this Intrinsically Safe Battery Box in Dubai to protect people, pass audits, and keep instruments, alarms, and controls powered—available now at Atex Hub.







