

If you have any questions before making a purchase chat with our online operators to get more information.
Ask An Expert
The Push Button PB1-8 Series is a rugged, flameproof control station designed for hazardous gas and dust zones. It gives operators a clear, glove-friendly interface for start, stop, reset, and emergency stop (E-stop) right beside pumps, fans, skids, conveyors, and valves. With corrosion-resistant housings, tight sealing, and Ex-compatible cable entries, the PB1-8 performs day after day in the UAE’s heat, dust, humidity, and salt air—especially across Sharjah, Dubai, and Abu Dhabi. If you want local controls that install fast, pass audits, and last for years, choose the Flame proof Push Button in Sharjah – PB1-8 Series, supplied locally by Atex Hub.
A flame proof (Ex d) push button is a sealed operator station built to contain any internal ignition and stop it from igniting the surrounding explosive atmosphere. The PB1-8 Series combines Ex-certified enclosures (Ex d / Ex e / Ex t variants) with reliable operators and contact blocks that control arcing, heat, and surface temperature. This lets you place control points close to the process, reducing walking time and improving response in both routine tasks and emergencies. For Sharjah and the wider UAE—strong UV, wind-blown dust/sand, washdowns, and coastal air—the PB1-8 uses marine-grade materials, UV-stable finishes, and IP66/67 sealing so labels stay readable, buttons stay smooth, and inspectors stay happy.
Across Sharjah, Dubai, and Abu Dhabi, the PB1-8 is your everyday control point where speed and clarity matter. Use it to start/stop motors, trigger an Emergency Stop for immediate safe shutdown, acknowledge/reset alarms, and select modes (Hand/Off/Auto) using selector switches. Maintenance teams use PB1-8 stations to jog or isolate equipment during testing, while production places them along access and escape routes for quick, intuitive action. Color-coded actuators (green = start, red = stop/E-stop, yellow = reset), Arabic/English legends, and glove-friendly heads cut mistakes in noisy, low-visibility areas typical of UAE industrial sites.
Oil & Gas / Petrochemicals: Pump skids, separators, compressor shelters, tank farms, chemical dosing panels.
Marine & Ports: Pump rooms, jetties, deck machinery—environments with spray, vibration, and salt air.
Utilities & Water: Chlorination rooms, MCC outstations, and remote kiosks needing Ex-rated local control.
Food, Pharma & Chemical: Powder and solvent zones that demand cleanable, clearly labelled stations.
Industrial & Warehousing: HVAC, conveyors, mixers, and battery-charging areas in classified locations.
Choose PB1-8 for simplicity, durability, and fast deployment. Enclosures in 316 stainless steel or GRP fight corrosion and UV—ideal for outdoor and coastal use. Metric and NPT entries match existing conduit; IP66/67 sealing keeps out dust and water. Inside, a tidy layout speeds wiring and maintenance. With Atex Hub support, you get correct Ex markings, thread forms, dual-language legends, and drawings/nameplates tailored to UAE standards—so submittals move faster, and audits go smoothly across Sharjah, Dubai, and Abu Dhabi.
| Item | Specification |
|---|---|
| Model | Push Button PB1-8 Series (Flameproof Ex control station) |
| Protection Concepts | Ex d (flameproof), Ex e (increased safety), Ex t (dust) – variant dependent |
| Enclosure Materials | 316 stainless steel or GRP; corrosion-resistant hardware |
| Operators | Momentary/maintained push buttons, E-stop (mushroom, twist-to-release), selector switches |
| Contacts | 1NO/1NC standard; options 2NO/2NC (up to 4 blocks, model dependent) |
| Electrical Ratings | Typical AC-15: 230 V / 3 A, DC-13: 24 V / 2 A (contact block dependent) |
| Ingress Protection | Up to IP66/IP67 with approved Ex glands |
| Cable Entries | M20/M25 metric or ½″/¾″ NPT; stopping plugs; earth tag |
| Ambient Temperature | −40 °C to +55 °C (variant dependent) |
| Legends & Marking | Arabic/English legends; ISO/IEC pictograms; engraved/laser nameplates |
| Mounting | Wall/panel mount; stainless fixings; internal earth point |
| Accessories | Guarded E-stop hood, padlock hasp, pilot lamps, tag plates, sealing washers |
| Compliance | ATEX/IECEx aligned; exact Ex code on supplied label/datasheet |
1) What’s the difference between Ex d and Ex e?
Ex d contains internal ignition; Ex e increases safety by avoiding arcs. Choose based on zone, gas group, and device type.
2) Can I add an Emergency Stop?
Yes—PB1-8 supports E-stop (mushroom, twist-to-release). Ensure contact ratings and your safety loop meet the risk assessment.
3) Do you supply Arabic/English legends?
Absolutely—dual-language legends and ISO/IEC symbols help pass UAE inspections and improve operator clarity.
4) What IP rating do I need outdoors?
Installed with Ex glands and sealing washers, PB1-8 achieves IP66/67. Re-torque and inspect seals during preventive maintenance.
5) How many contacts can a station hold?
Most PB1-8 builds support up to four contact blocks (model dependent). Confirm I/O before ordering.
6) Are metric and NPT threads available?
Yes—M20/M25 and ½″/¾″ NPT, plus certified reducers/adapters to maintain Ex/IP integrity.
7) Where should I place the stations?
Near the equipment and along access/escape routes, aligned with your HSE plan and local standards.
For simple, rugged, and compliant local control in hazardous areas, choose the Push Button PB1-8 Series. Built for the UAE climate and supplied by Atex Hub, PB1-8 stations speed installation, simplify inspections, and protect people and assets across Sharjah, Dubai, and Abu Dhabi. When you need flame proof push buttons that just work, PB1-8 delivers—day after day.