

If you have any questions before making a purchase chat with our online operators to get more information.
Ask An Expert
The ATEX GRP Ex e Junction Box protects terminals, wiring connections, cable joints, lighting circuits, instrumentation loops, alarm wiring, and control connections in hazardous area installations. It gives a strong glass reinforced polyester junction box for industrial sites where explosive gas, combustible dust, corrosion, moisture, chemicals, and outdoor exposure can affect electrical safety.
For companies looking for Flame Proof Junction Box in Bahrain, this product offers a reliable solution for ATEX GRP enclosures, explosion proof enclosures, ATEX enclosures, Ex proof enclosures, flame proof enclosures, hazardous area enclosures, and intrinsically safe enclosures. It supports safe cable termination and terminal protection in oil & gas, refinery, petrochemical, marine, chemical, power, automation, and industrial infrastructure projects.
Atex Hub supplies ATEX GRP Ex e Junction Boxes globally across Bahrain, UAE, Saudi Arabia, Qatar, Oman, Kuwait, Europe, Africa, and worldwide, supporting hazardous area projects with certified Ex junction box solutions.
An ATEX GRP Ex e Junction Box is an Ex-rated junction box used to connect, terminate, and protect electrical cables in hazardous areas. It is commonly used for terminal blocks, lighting circuits, instrument wiring, sensor cables, control wiring, alarms, and field junction points.
GRP means glass reinforced polyester. This material gives good corrosion resistance, chemical resistance, light weight, and long service life in harsh industrial environments. It is useful in Bahrain’s refinery, marine, coastal, petrochemical, and industrial locations where humidity, salt air, chemicals, and outdoor exposure can affect metallic equipment.
The reference product describes the range as GRP junction boxes suitable for ATEX-rated Ex e Increased Safety areas. It also states that the boxes are supplied fully assembled and certified, and that terminal and cable entry quantity must be confirmed during enquiry. The listed markings include II 2G Ex e II T4/T6, II 2G Ex ia IIC T6, and II 2D Ex tD A21 IP65 T80°C.
Product Highlights:
The ATEX GRP Ex e Junction Box helps contractors protect electrical connections in hazardous area projects. It supports safer cable routing and terminal protection where flammable gases, vapours, combustible dust, moisture, corrosive chemicals, and outdoor conditions can affect wiring systems.
Although this product uses Ex e increased safety protection rather than a traditional Ex d flameproof design, it can still support projects searching for a Flame Proof Junction Box in Bahrain when the project needs an Ex-certified junction box for hazardous area wiring. The correct selection must always match the area classification and final certificate.
The reference page states that empty “U” certified enclosures are not supplied in this range; the terminal boxes must be configured with the required number of terminals and cable entries before supply.
An ATEX GRP Ex e Junction Box protects cable terminations and electrical connections in hazardous areas. It supports safe cable management in process plants, oil and gas facilities, marine areas, power facilities, utilities, industrial zones, and infrastructure sites.
Industries use these junction boxes across Bahrain, UAE, Saudi Arabia, Qatar, Oman, Kuwait, Europe, Africa, and worldwide. In Bahrain, they support refineries, petrochemical plants, oil and gas facilities, marine terminals, ports, utilities, power plants, and industrial projects.
The technical details below help buyers choose the correct ATEX GRP Ex e Junction Box. Always confirm the exact enclosure size, terminal quantity, cable gland size, cable entry layout, Ex marking, IP rating, temperature class, and hazardous area classification before ordering.
| Specification | Details |
|---|---|
| Product Name | ATEX GRP Ex e Junction Boxes |
| Product Category | ATEX GRP Enclosure / Hazardous Area Junction Box |
| Product Type | GRP Ex e Junction Box / Terminal Box |
| Main Function | Cable connection, cable termination, cable splitting, and terminal protection |
| Material | GRP / Glass Reinforced Polyester |
| Main Protection Type | Ex e Increased Safety |
| Intrinsic Safety Marking | Ex ia IIC T6 |
| Dust Protection Marking | Ex tD A21 IP65 T80°C |
| Gas Marking | II 2G Ex e II T4/T6 |
| ATEX Group / Category | II 2G and II 2D |
| Certificate Type | EU-Type Examination Certificate |
| Supply Condition | Fully assembled and certified |
| Empty Enclosure Supply | Not supplied as empty “U” certified enclosure in this range |
| Required Enquiry Details | Terminal quantity, cable entry quantity, gland size, cable gland type |
| Cable Entry Accessories | Ex cable glands, stopping plugs, reducers, adaptors, locknuts, sealing washers, earth tags |
| Suitable Use | Terminal protection, lighting circuits, instrument wiring, control wiring, field cable connections |
| Common Industries | Oil & gas, refinery, petrochemical, marine, chemical, power, automation, industrial plants |
| Supplier | Atex Hub |
| Supply Region | Bahrain, UAE, Saudi Arabia, Qatar, Oman, Kuwait, Europe, Africa, Worldwide |
The reference page lists Ex e, Ex ia, and Ex tD markings, states that the boxes are supplied fully assembled and certified, and asks users to confirm terminal and gland sizes and quantities when enquiring.
The correct ATEX GRP Ex e Junction Box depends on the site classification, circuit type, terminal quantity, gland size, cable entry plan, temperature class, IP rating, and certification requirement. A wrong selection can affect inspection approval and long-term safety.
| Selection Point | What to Check |
|---|---|
| Gas Zone | Confirm whether the project needs Zone 1 or Zone 2 hazardous area suitability |
| Dust Zone | Confirm whether the project needs dust hazardous area protection |
| Protection Type | Select Ex e, Ex ia, or dust protection based on the final wiring design |
| Circuit Type | Confirm whether the box carries intrinsically safe or non-intrinsically safe circuits |
| Material | Choose GRP where corrosion resistance, chemical resistance, and lightweight construction are needed |
| Terminal Quantity | Confirm the number and rating of terminals before supply |
| Cable Entries | Confirm cable entry quantity, thread type, gland size, and cable diameter |
| IP Rating | Maintain IP protection after cable gland and stopping plug installation |
| Temperature Class | Confirm T4, T6, or T80°C marking against the hazardous area requirement |
| Accessories | Use certified cable glands, stopping plugs, reducers, adaptors, locknuts, and sealing washers |
The ATEX GRP Ex e Junction Box can support different protection concepts depending on the final certified configuration.
| Protection Type | Meaning | Common Use |
|---|---|---|
| Ex e Increased Safety | Reduces ignition risk by safer terminals, insulation, spacing, and construction | Terminal boxes and junction wiring |
| Ex ia Intrinsic Safety | Limits electrical energy so sparks or heat cannot ignite the atmosphere under approved conditions | Instrument loops, sensors, transmitters, alarms, and signal circuits |
| Ex tD / Dust Protection | Helps protect electrical equipment in combustible dust atmospheres | Dust hazardous locations |
| T4 / T6 | Gas temperature class based on maximum surface temperature | Gas hazardous area selection |
| T80°C | Dust surface temperature marking | Dust hazardous area selection |
Both GRP and metallic junction boxes can be used in hazardous areas when certified correctly. The best choice depends on the environment, impact requirement, corrosion risk, weight, and project specification.
| Type | Best Use |
|---|---|
| ATEX GRP Ex e Junction Box | Best for lightweight, corrosion-resistant, chemical-resistant Ex e terminal connections |
| Stainless Steel Junction Box | Best for marine, offshore, chemical, and high mechanical strength requirements |
| Aluminium Junction Box | Best for lightweight metallic enclosure applications where approved by the project |
| Ex e Junction Box | Best for increased safety terminal wiring |
| Intrinsically Safe Junction Box | Best for approved low-energy Ex i instrument and signal circuits |
| Dust Protected Junction Box | Best for combustible dust hazardous areas |
A junction box can support intrinsically safe circuit applications only when the full assembly uses approved Ex i components and follows the required wiring rules. The GRP box alone does not make every circuit intrinsically safe.
For Flame Proof Junction Box in Bahrain projects involving Ex i circuits, check these points before final selection:
This helps the junction box support safer terminal protection for instrument loops, sensors, signal circuits, alarms, and low-energy control wiring.
Certifications help buyers choose the correct GRP junction box for hazardous area projects. The final junction box must match the site zone, protection concept, terminal type, cable gland system, material, IP rating, temperature class, and project specification.
The reference product page lists the certificate type as EU-Type Examination Certificate and gives the marking as II 2G Ex e II T4/T6, II 2G Ex ia IIC T6, and II 2D Ex tD A21 IP65 T80°C.
Correct installation helps the ATEX GRP Ex e Junction Box maintain hazardous area safety. The installer must check the certificate, Ex marking, terminal layout, cable entry design, wiring clearance, sealing, cover fixing, cable glands, and unused entries before energising the circuit.
Use trained personnel for hazardous area installation. Follow the project specification, certificate limits, manufacturer instructions, inspection requirements, and site area classification.
The ATEX GRP Ex e Junction Box gives industries a lightweight, durable, and corrosion-resistant solution for hazardous area cable connection and terminal protection. It supports safe wiring, cable management, terminal protection, and long-term performance in demanding industrial sites.
For Bahrain projects, this junction box suits oil & gas, petrochemical, refinery, chemical, marine, power, automation, process control, and infrastructure applications. Its GRP construction, Ex e increased safety marking, Ex ia intrinsically safe option, dust protection marking, and fully assembled certified supply make it useful for hazardous area installations.
1. What is an ATEX GRP Ex e Junction Box used for?
It protects terminals, wiring connections, cable joints, lighting circuits, and instrument loops in hazardous area installations.
2. Is this suitable for Flame Proof Junction Box in Bahrain projects?
Yes, it can suit Bahrain hazardous area projects when the Ex marking, certificate, terminal layout, cable entries, and site classification match the requirement.
3. Is Ex e the same as flameproof Ex d?
No, Ex e increased safety is different from Ex d flameproof protection, but both are hazardous area protection concepts used depending on the project need.
4. What material is used?
This junction box range uses GRP / glass reinforced polyester.
5. What markings are listed?
The reference page lists II 2G Ex e II T4/T6, II 2G Ex ia IIC T6, and II 2D Ex tD A21 IP65 T80°C.
6. Can it support intrinsically safe circuits?
Yes, the listed marking includes Ex ia IIC T6, but the final wiring must use approved Ex i components and installation methods.
7. Can it be supplied empty?
The reference page states that empty “U” certified enclosures are not supplied in this range.
8. What details are needed for enquiry?
Terminal quantity, cable entry quantity, gland sizes, cable gland type, and project certification requirements should be confirmed.
9. What should buyers check before ordering?
Buyers should check enclosure size, Ex marking, certificate, terminals, cable entries, IP rating, temperature class, and site classification.
10. Who supplies ATEX GRP Ex e Junction Boxes globally?
Atex Hub supplies ATEX GRP Ex e Junction Boxes across Bahrain, UAE, Saudi Arabia, Qatar, Oman, Kuwait, Europe, Africa, and worldwide.
The ATEX GRP Ex e Junction Box gives industries a corrosion-resistant and lightweight solution for hazardous area terminal and field wiring protection. It helps protect cable joints, lighting circuits, terminals, instrument loops, and control wiring while supporting safer installation in explosive gas and dust environments.
For buyers searching for Flame Proof Junction Box in Bahrain, this product offers strong value for oil & gas, petrochemical, refinery, chemical, marine, power, automation, and industrial projects. Its GRP construction, Ex e increased safety marking, Ex ia intrinsically safe marking, dust protection marking, and fully assembled certified supply make it useful for demanding hazardous area applications.
Atex Hub supplies ATEX GRP Ex e Junction Boxes globally across Bahrain, UAE, Saudi Arabia, Qatar, Oman, Kuwait, Europe, Africa, and worldwide, helping industries source safe and compliant hazardous area junction box solutions for Ex installations.