Flame proof Control Station in UAE | Atex Control Station Supplier
The ATEX Control Station P Series is a rugged, flame proof (Ex d) control point designed for hazardous gas and dust zones. It puts Start/Stop, E-Stop, reset, selector modes, and pilot indication right beside your pumps, fans, skids, conveyors, and valves—so operators act fast and safely. Built for Gulf sites, it handles heat, sand, humidity, and salt air across Dubai, Sharjah, and Abu Dhabi. With certified cable entries, tight IP sealing, and clear legends, the P Series installs quickly, passes audits smoothly, and delivers long service life. Available locally at Atex Hub, it’s configurable to your process logic and site standards throughout the UAE.
what is Flame proof Control Station in UAE
A flame proof control station is an Ex-certified enclosure that contains any internal ignition so it cannot ignite the surrounding explosive atmosphere. The P Series follows the Ex d (flameproof) concept, with options to combine Ex e (increased safety) and Ex t (dust) where required. This lets you place local controls close to the process without adding ignition risk. With IP66/67 sealing and marine-grade materials (GRP, aluminium, or SS316), the station keeps contaminants out and labels readable—helping teams stay productive and compliant across UAE plants, ports, and utilities.
key uses of Ex proof Control Station in UAE
Start/Stop for motors, pumps, compressors, and conveyors
Emergency Stop (E-Stop) for immediate safe shutdown
Mode selection (Hand/Off/Auto or Local/Remote) via selector switches
Alarm acknowledge/reset with pilot lamps for instant status feedback
key applications
Oil & Gas / Petrochemicals: wellheads, separators, dosing/metering skids, tank farms
Marine & Ports: pump rooms, jetties, loading arms, deck machinery in salt-air environments
Power & Water: desalination lines, booster stations, MCC outstations, chemical rooms
Chemical / Pharma: flammable solvent areas, blending, filling, and packaging cells
Food, Grain & FMCG (dust): mills, conveyors, silos, bagging lines in classified zones
Why choose Flame proof Control Station in UAE
Gulf-ready build: SS316 or GRP for corrosion and UV resistance; IP66/67 sealing
Modular configuration: push buttons, selectors, pilot lamps, E-Stops—mix and match per SLD
Installer-friendly: roomy wiring space, clear terminals, and metric/NPT threaded entries
Local support: Atex Hub supplies correct Ex markings, dual-language legends, drawings, and nameplates for quick submittals and smooth audits in Dubai, Sharjah, and Abu Dhabi
Technical Specs of ATEX Control Station P Series
| Item | Specification |
|---|
| Product | ATEX Control Station P Series (flame proof Ex control station) |
| Protection Concepts | Ex d (flameproof); options Ex e (increased safety) and Ex t (dust) as part of the assembly |
| Area Classification | Gas: Zone 1 & 2 (IIB/IIC) · Dust: Zone 21 & 22 (IIIC) |
| Typical Ex Marking | II 2G Ex db eb IIC T6 Gb · II 2D Ex tb IIIC T80°C Db (per configuration) |
| Enclosure Materials | GRP / Powder-coated aluminium / SS316 with corrosion-resistant hardware |
| Ingress / Impact | Up to IP66/67 (IEC 60529); IK rating per enclosure type |
| Ambient Range | −40 °C to +55/60 °C (variant dependent) |
| Electrical Ratings | Typical contacts AC-15: 230 V / 3 A, DC-13: 24 V / 2 A (contact block dependent) |
| Operators | Momentary/maintained push buttons, E-Stop (mushroom, twist-release), selector switches, pilot lamps |
| Contacts | 1NO/1NC standard; options 2NO/2NC (multiple blocks per operator, model dependent) |
| Cable Entries | M20/M25/M32 or ½″/¾″ NPT; certified reducers/stopping plugs |
| Mounting | Wall/panel mount; internal earth bar; stainless fixings |
| Accessories | Legend/tag plates (AR/EN), padlock hasps, guards, sealing washers |
| Compliance | ATEX/IECEx aligned; exact Ex code and certificate on supplied nameplate/datasheet |
Certifications, Compliance & Standards
FAQs
1) What does “flame proof (Ex d)” mean?
It means the enclosure contains any internal ignition, so flames/hot gases cannot ignite the outside atmosphere.
2) Can I include an Emergency Stop?
Yes—mushroom E-Stop with twist-to-release is available. Choose contact blocks that meet your safety loop/SIL plan.
3) Do you provide Arabic/English legends?
Absolutely. Dual-language legends and clear pictograms improve operator clarity and help pass UAE inspections.
4) Which enclosure suits coastal Dubai sites?
SS316 or GRP for strong resistance to salt air and UV—ideal for ports, jetties, and offshore-linked areas.
5) What IP rating should I target outdoors?
With approved Ex glands and seals, the P Series achieves IP66/67. Retorque and inspect as part of PM.
6) How many contacts can each operator have?
Most builds support multiple contact blocks (e.g., 1NO/1NC or 2NO/2NC). Confirm I/O early to size the enclosure correctly.
7) Where can I buy the P Series in the UAE?
From Atex Hub, with local configuration support and fast documentation across Dubai, Sharjah, and Abu Dhabi.
Conclusion
The ATEX Control Station P Series delivers safe, simple, and durable local control in hazardous areas across the UAE. It’s configurable to your process, easy to install and maintain, and built to withstand Gulf conditions. With strong ATEX/IECEx credentials, high IP protection, and complete documentation from Atex Hub, it’s a reliable choice for plants in Dubai, Sharjah, and Abu Dhabi that need Flame proof Control Stations that just work.
