

If you have any questions before making a purchase chat with our online operators to get more information.
Ask An Expert
The ATEX Antenna GSM RTFI257CTM900 , an Explosion Proof Antenna in Dubai made for places where gas or dust could ignite. It keeps wireless data moving safely on busy industrial sites across the UAE, especially in Dubai, Sharjah, and Abu Dhabi. Use it for telemetry, SCADA, alarms, and IoT devices that must work near process equipment. The antenna has a flameproof body, sealed cable entries, and a weather-tight finish, so it stands up to desert heat, coastal air, and washdowns. It mounts quickly, connects to standard 50-ohm radios, and ships with the documents your HSE team needs. You can order it with local support from Atex Hub.
An Explosion Proof Antenna in Dubai is a passive antenna built and certified for hazardous areas. Unlike ordinary indoor antennas, the RTFI257CTM900 uses Ex-rated hardware, flameproof joints, and sealed terminals so that internal faults cannot create a spark or hot surface. It is tuned for GSM 900 operation and supports GPRS/2G links used by gateways and RTUs across the UAE. Because it is certified for Zone 1/Zone 2 (gas) and Zone 21/Zone 22 (dust), you can place the antenna close to skids, tanks, and pipelines. Shorter feeder runs mean lower loss, stronger signals, and more reliable communications for plant networks in Dubai, Sharjah, and Abu Dhabi.
Use the ATEX Antenna GSM RTFI257CTM900 when you need safe, stable wireless links inside or near classified zones. Typical uses include tank level and flow telemetry, valve station monitoring, compressor and pump status, and alarm signaling to the control room. In ports and offshore jetties, it helps yard devices, beacons, and PA/GA interfaces stay connected even in salty air. In utilities, it supports smart water and power networks during heat and dust storms. Because it is ATEX/IECEx certified, you can mount it at the point of need with confidence and keep your radio paths short and clean.
You will see this Explosion Proof Antenna in Dubai on oil & gas wellhead and pipeline skids, refinery units, tank farms, marine loading arms, chemical blending skids, power and water plants, and dust-prone warehouses. Teams in KIZAD, Mussafah, JAFZA, and Hamriyah Free Zone fit it to masts, handrails, and rooftops to feed PLCs, SCADA radios, and IoT gateways. The compact body, corrosion-resistant finish, and high ingress protection make it a neat fit for brownfield retrofits and new EPC builds. With the right pattern and gain for short-to-medium ranges, signals stay clear even around heavy steel and rotating equipment.
Choose RTFI257CTM900 for safe, simple, and steady GSM communications. The omni pattern gives dependable local coverage around equipment. The 50-ohm N-type connector works with most industrial modems, so integration is quick. High IP sealing resists dust, rain, and washdowns, while the metal housing handles sun and salt across the UAE. You get fewer callouts, cleaner RF, and faster approvals thanks to the supplied certificates and installation guide. With Atex Hub in Dubai, band checks, mounting hardware, and paperwork are easy to sort—keeping projects in Sharjah and Abu Dhabi on schedule.
| Parameter | Specification |
|---|---|
| Product | ATEX Antenna GSM RTFI257CTM900 (Focus: Explosion Proof Antenna in Dubai) |
| Operating band | GSM 900 (approx. 880–960 MHz) — GPRS/2G |
| Use case | Telemetry, SCADA, alarms, IoT gateways, RTUs |
| Antenna type | Omnidirectional, vertical polarization |
| Nominal gain | ~ 2 dBi (typical) |
| Impedance | 50 Ω |
| VSWR | ≤ 1.8:1 (typical across band) |
| RF connector | N-type female, Ex-approved cable entry |
| Explosion protection | ATEX/IECEx Ex d (flameproof) — final code confirmed at order |
| Zones | Gas Zone 1/2; Dust Zone 21/22 |
| Gas group / T-class | IIB/IIC, typical T4 (confirm per site dossier) |
| Ingress protection | IP66/IP67 enclosure |
| Operating temperature | −20 °C to +55 °C (extended options on request) |
| Housing | Stainless steel / coated aluminum, corrosion-resistant |
| Mounting | Pole/wall bracket; adjustable clamp kits |
| Documentation | ATEX/IECEx certificate, nameplate, installation guide |
ATEX Directive 2014/34/EU — equipment for explosive atmospheres
IECEx Scheme — global Ex conformity
EN/IEC 60079 series — explosive atmospheres (equipment & protection)
IEC 60529 (IP Code) — ingress protection ratings
ISO 9001:2015 — quality management systems
CE Marking — EU conformity route
1) Can I mount this antenna in Zone 1 areas?
Yes. It is designed for hazardous zones; final ATEX/IECEx marking is matched to your site dossier at order.
2) Which radios does it support?
Any 50-ohm modem or gateway in the GSM 900 band—GPRS/2G SCADA radios and many IoT platforms used in the UAE.
3) Will it survive heat, dust, and salty air?
Yes. With IP66/67 sealing and a corrosion-resistant body, it suits desert and coastal sites in Dubai and Abu Dhabi.
4) How do I keep VSWR low on a steel skid?
Mount with the supplied bracket, keep a small clearance from metalwork, and use low-loss 50-ohm coax with strain relief.
5) Can I order different connectors or cable kits?
Yes. N-type is standard, but Ex-approved alternatives can be supplied to fit your receivers and routing.
6) What documents are included?
ATEX/IECEx certificates, nameplate data, and an installation guide to support audits and inspections.
7) Where can I buy it locally?
From Atex Hub, serving Dubai, Sharjah, and Abu Dhabi, with quick help on mounts, cable kits, and paperwork.
The ATEX Antenna GSM RTFI257CTM900 is a dependable Explosion Proof Antenna in Dubai for safe telemetry and plant communications. It combines Ex-rated construction, strong weather protection, and easy integration to keep data flowing and audits simple. With help from Atex Hub, you get the right mount, the right cable kit, and the right documents—so projects across Dubai, Sharjah, and Abu Dhabi move from design to operation with confidence.