

If you have any questions before making a purchase chat with our online operators to get more information.
Ask An Expert
The ATEX Split Cable Gland – KVT 80/6 Black is a split cable gland designed for routing and sealing pre-terminated cables through panels, enclosures, cabinets, and machine housings. It helps installers pass connectorised cables through a round cut-out without removing plugs, connectors, or cable ends. This makes installation faster and reduces rework during maintenance, retrofit, and equipment upgrades.
For companies searching for Ex Proof Split Cable Gland in Sharjah, this product suits ATEX cable entry systems, explosion proof cable entry systems, flame proof cable entry systems, hazardous area cable entry systems, and intrinsically safe cable entry systems search requirements. It supports cable routing, cable sealing, strain relief, cable entry, cabinet wiring, machine wiring, control panel cable management, and hazardous-area enclosure projects.
Atex Hub supplies Ex proof split cable glands and hazardous-area cable entry systems globally across Sharjah, UAE, Saudi Arabia, Qatar, Oman, Kuwait, Bahrain, Europe, Africa, and worldwide, helping industries source suitable cable entry products for enclosures, junction boxes, machines, panels, and industrial systems.
The ATEX Split Cable Gland – KVT 80/6 Black is a split round cable gland used for routing and sealing pre-terminated cables. The KVT 80 ATEX range uses two half shells that close around cable inserts. When installers connect the two half shells with attached screws, the inserts apply pressure on the routed cables and help seal the cable entry point.
The KVT 80/6 ATEX version uses a round Ø80 mm cut-out and provides IP54 protection when installed with gasket and correct cable inserts. It supports 6 small KT cable inserts and comes in black under order number 49122.
This split cable gland suits fixed cable installation in potentially explosive atmospheres. The ATEX cable entry product range supports equipment group II, categories 2G, 3G, 2D, and 3D, and zones 1 + 21 and 2 + 22 for gas and dust areas.
The KVT 80/6 Black ATEX split cable gland gives installers a practical cable entry solution for pre-terminated cables. It supports fast front-side assembly, high cable density, connector protection, cable sealing, and easier maintenance.
The product data states that the KVT 80 split cable glands are designed for routing and sealing pre-terminated cables, and that the gland can fit wall thickness from 1.5 mm to 10 mm.
The ATEX Split Cable Gland – KVT 80/6 Black helps industries route connectorised cables into panels and enclosures without cutting or re-terminating cables. It suits applications where cable entry needs sealing, cable protection, easy retrofit access, and reliable industrial installation.
| Specification | Details |
|---|---|
| Product Name | ATEX Split Cable Gland – KVT 80/6 Black |
| Product Type | ATEX / Ex Proof / Hazardous Area Split Cable Gland |
| Product Series | KVT 80 ATEX |
| Product Version | KVT 80/6 ATEX Black |
| Order Number | 49122 |
| Main Use | Routing and sealing pre-terminated cables |
| Cut-Out | Ø80 mm |
| Protection Class | IP54 with gasket and correct cable inserts |
| Cable Insert Capacity | 6 small KT inserts |
| Material | Polycarbonate |
| Screw Material | Stainless steel |
| Colour | Black |
| Flame Class | UL94-V0, self-extinguishing |
| Temperature Range | -30°C to +90°C static |
| Equipment Group | II |
| Category | 2G, 3G, 2D, 3D |
| Zone Suitability | 1 + 21, 2 + 22 |
| Test Standard | EN 60079-0 |
| Properties | Halogen free, silicone free |
| Wall Thickness Suitability | 1.5 mm to 10 mm |
| Mounting Torque Note | 1 Nm for 1.5 mm sheet metal; 1.5 Nm from 2 mm sheet metal |
| Accessories | KT cable inserts, grey |
| Supplier | Atex Hub |
The KVT 80 ATEX specification table lists polycarbonate material, stainless steel screws, UL94-V0 flame class, IP54 protection, -30°C to +90°C static temperature, equipment group II, 2G / 3G / 2D / 3D categories, and EN 60079-0 test standard.
The correct Ex Proof Split Cable Gland in Sharjah depends on cable count, cable insert size, cut-out diameter, wall thickness, enclosure type, IP rating, hazardous-area zone, and installation method.
| Selection Point | What to Check |
|---|---|
| Cable Type | Confirm cables are pre-terminated or connectorised |
| Cable Count | Use KVT 80/6 where 6 small cable insert positions are required |
| Cable Inserts | Select correct KT cable inserts for each cable diameter |
| Cut-Out Size | Confirm Ø80 mm panel cut-out |
| Wall Thickness | Confirm enclosure wall thickness between 1.5 mm and 10 mm |
| IP Requirement | Confirm IP54 is suitable for the enclosure project |
| Hazardous Area | Confirm Zone 1, Zone 2, Zone 21, or Zone 22 requirement |
| Material Requirement | Confirm polycarbonate and stainless steel screw suitability |
| Colour Requirement | Select black version where project design requires it |
| Mounting Torque | Use correct torque based on sheet metal thickness |
| Cable Fixing | Use fixed installation only where strain and torsion do not affect the cable |
| Compliance | Confirm datasheet, certificate, enclosure approval, cable insert selection, and site classification before procurement |
A split cable gland helps installers route pre-terminated cables without removing connectors. This saves time, protects factory-assembled cables, and reduces wiring errors during panel installation or maintenance.
The KVT 80/6 ATEX Black uses two half shells. Once the half shells are joined with screws, the cable inserts apply pressure on the routed cables and help create a sealed cable entry. This design supports fast retrofit work, machine upgrades, panel modifications, and cable replacement.
IP54 protection helps guard the cable entry against limited dust ingress and water splashing when the gasket and correct cable inserts are selected and installed properly. This matters in industrial panels, machine housings, automation enclosures, and indoor or protected outdoor areas.
For hazardous-area projects, IP rating alone is not enough. The complete enclosure, cable gland, cable inserts, gasket, mounting surface, cable routing method, and site approval must match the project’s Ex classification and inspection requirement.
The ATEX cable entry information states that cable entries are only suitable for fixed cable installation where strain and torsional loading on the cable are not possible.
This is important because cable movement can affect sealing, strain relief, and long-term performance. Installers should make sure cables are properly supported, clamped, and routed so that pulling force or twisting does not act on the cable gland.
The KVT 80 ATEX product note recommends torque values when mounting on sheet metal. It lists 1 Nm for 1.5 mm sheet metal and 1.5 Nm from 2 mm sheet metal.
Correct torque helps the gland sit securely on the panel and supports proper sealing. Too little torque may reduce sealing pressure, while excessive torque may damage parts or affect the installation.
The KVT 80/6 ATEX Black uses polycarbonate material and stainless steel screws. It also carries UL94-V0 self-extinguishing flame class. These details matter in industrial cable entry systems because panels can face heat, vibration, electrical equipment, dust, and long service periods.
The gland also lists halogen-free and silicone-free properties. This helps projects where material selection must support cleaner industrial installation, low-contamination areas, or specific enclosure requirements.
Many buyers use ATEX cable entry systems, explosion proof cable entry systems, flame proof cable entry systems, hazardous area cable entry systems, and intrinsically safe cable entry systems together. However, each term can describe a different cable entry or enclosure requirement.
| Term | Meaning |
|---|---|
| ATEX Cable Entry Systems | Cable entry products selected for Ex-rated enclosure projects where approval allows |
| Explosion Proof Cable Entry Systems | Cable entry products used in hazardous-area enclosure applications |
| Flame Proof Cable Entry Systems | Cable entry systems selected for flameproof or Ex-rated projects |
| Hazardous Area Cable Entry Systems | Cable entry systems used in classified gas, vapour, dust, or industrial areas |
| Intrinsically Safe Cable Entry Systems | Cable entry systems used with approved low-energy Ex i wiring and compliant enclosures |
| Split Cable Gland | Cable gland that opens into sections to route connectorised cables |
| Pre-Terminated Cable Entry | Cable entry method that keeps plugs and connectors attached during installation |
| KT Cable Insert System | Insert-based cable sealing method used with compatible split frames or glands |
This difference matters in Sharjah projects because consultants, EPC contractors, safety teams, and inspectors may ask for a specific protection method. Always confirm whether the project needs ATEX certification, Zone 1, Zone 2, Zone 21, Zone 22, IP54, EN 60079-0, UL94-V0, fixed cable installation, or intrinsically safe wiring selection.
Correct installation helps the ATEX Split Cable Gland – KVT 80/6 Black perform safely and reliably. The installer must check cable diameter, cable insert selection, cut-out size, wall thickness, torque, enclosure approval, cable support, and site classification before installation.
Certifications and standards help buyers select the correct split cable gland for hazardous-area and industrial enclosure projects. The final selection must match the enclosure design, hazardous zone, gas or dust classification, IP requirement, cable insert selection, wall thickness, and site inspection standard.
The KVT 80 ATEX product data lists equipment group II, categories 2G, 3G, 2D, 3D, zones 1 + 21 and 2 + 22, and test standard EN 60079-0. The product also lists IP54 protection when used with gasket and correct cable inserts.
The ATEX Split Cable Gland – KVT 80/6 Black gives industries a practical cable entry solution for routing and sealing pre-terminated cables. It supports Ø80 mm cut-out, 6 small KT cable inserts, IP54, polycarbonate material, stainless steel screws, UL94-V0 flame class, -30°C to +90°C static temperature, equipment group II, 2G / 3G / 2D / 3D categories, Zone 1 / 21 and Zone 2 / 22 suitability, and EN 60079-0 testing.
For Sharjah projects, this split cable gland suits automation, control panels, machine building, industrial enclosures, utilities, factories, warehouses, workshops, process plants, ports, skids, maintenance panels, and infrastructure applications. Its split design, front-side assembly, pre-terminated cable support, high packing density, and fixed installation suitability make it useful for demanding cable entry and cable management work.
1. What is ATEX Split Cable Gland – KVT 80/6 Black used for?
It routes and seals pre-terminated cables through panels, cabinets, machines, and enclosures without removing connectors.
2. Is this suitable for Ex Proof Split Cable Gland in Sharjah projects?
Yes, it can suit Sharjah hazardous-area projects when the enclosure approval, cable inserts, IP rating, zone classification, and installation method match the site requirement.
3. What cut-out size does the KVT 80/6 ATEX use?
It uses a Ø80 mm cut-out.
4. What IP rating does the gland provide?
It provides IP54 protection when installed with gasket and correct cable inserts.
5. How many inserts does the KVT 80/6 version support?
The KVT 80/6 ATEX supports 6 small KT inserts.
6. What is the material of the split cable gland?
The gland uses polycarbonate, and the screws are stainless steel.
7. What temperature range does it support?
It supports -30°C to +90°C static temperature range.
8. What hazardous zones are listed for the ATEX cable entry system?
The product data lists Zone 1 + 21 and Zone 2 + 22 suitability.
9. Where can it be used in Sharjah?
It suits Sharjah, Hamriyah Free Zone, SAIF Zone, industrial areas, ports, warehouses, factories, utilities, workshops, petrochemical facilities, machine builders, automation panels, and infrastructure sites.
10. Who supplies Ex proof split cable glands globally?
Atex Hub supplies Ex proof split cable glands and hazardous-area cable entry systems across Sharjah, UAE, Saudi Arabia, Qatar, Oman, Kuwait, Bahrain, Europe, Africa, and worldwide.
The ATEX Split Cable Gland – KVT 80/6 Black gives industries a strong and practical solution for routing and sealing pre-terminated cables in industrial and hazardous-area enclosure projects. It supports Ø80 mm cut-out, 6 small KT inserts, IP54, polycarbonate construction, stainless steel screws, UL94-V0 flame class, -30°C to +90°C static temperature, equipment group II, 2G / 3G / 2D / 3D categories, and Zone 1 / 21 and Zone 2 / 22 applications.
For buyers searching for Ex Proof Split Cable Gland in Sharjah, this product offers strong value for control panels, automation systems, machine building, industrial enclosures, retrofit work, maintenance panels, utility systems, factories, workshops, warehouses, ports, process plants, and infrastructure projects. Its split cable gland design, front-side assembly, pre-terminated cable support, high packing density, and fixed installation suitability make it suitable for demanding cable entry systems.
Atex Hub supplies KVT 80/6 ATEX split cable glands and other hazardous-area cable entry systems globally across Sharjah, UAE, Saudi Arabia, Qatar, Oman, Kuwait, Bahrain, Europe, Africa, and worldwide, helping industries source suitable Ex-rated cable entry and enclosure accessory products.