

If you have any questions before making a purchase chat with our online operators to get more information.
Ask An Expert
The ATEX GRP Enclosure protects terminals, wiring, junction points, instrumentation circuits, control connections, and electrical components in hazardous area installations. It gives a rugged glass-fibre reinforced polyester enclosure for industrial locations where explosive gas, combustible dust, chemicals, corrosion, moisture, and mechanical stress can affect electrical safety.
For companies looking for Ex Proof GRP Enclosure in UAE, this product offers a reliable solution for ATEX GRP enclosures, explosion proof enclosures, ATEX enclosures, Ex proof enclosures, flame proof enclosures, hazardous area enclosures, and intrinsically safe enclosures. It supports safe cable termination, terminal protection, field wiring, and control connection applications in oil & gas, refinery, petrochemical, marine, chemical, power, automation, and industrial projects.
Atex Hub supplies ATEX GRP Enclosures globally across UAE, Saudi Arabia, Qatar, Oman, Kuwait, Bahrain, Europe, Africa, and worldwide, supporting hazardous area projects with certified Ex enclosure solutions.
An ATEX GRP Enclosure is a hazardous area enclosure made from glass-fibre reinforced polyester. It protects electrical terminals, cable connections, junction circuits, and field wiring in explosive atmosphere locations.
GRP means glass reinforced polyester. This material is widely used for hazardous area terminal boxes because it offers strong resistance against chemicals, corrosion, moisture, and mechanical stress. The reference page notes that glass-fibre reinforced polyester enclosures are used as terminal boxes in harsh environments, and that aggressive chemicals or mechanical stress do not easily damage these rugged enclosures.
This enclosure type can support Ex e increased safety, Ex i intrinsically safe circuit arrangements, and Ex tb dust protection depending on the final certified assembly, installed terminals, cable glands, and Ex marking.
Product Highlights:
The ATEX GRP Enclosure helps contractors protect electrical connections in hazardous area projects. It supports safe installation where flammable gases, vapours, combustible dust, corrosive chemicals, moisture, and outdoor conditions can affect electrical equipment.
Its GRP construction makes it useful for sites that need a lightweight, corrosion-resistant, and chemical-resistant enclosure. This is important for Dubai, Abu Dhabi, Sharjah, Ajman, Fujairah, Ras Al Khaimah, Umm Al Quwain, and wider UAE industrial facilities.
The reference page states that silicone seals in the lid close cleanly and permanently with low deformation, and that integral 4.5 mm clearance holes are moulded into the enclosure body to attach the DIN rail for terminal mounting.
ATEX GRP enclosures protect electrical terminals and cable connections in hazardous locations. They suit applications where equipment must reduce ignition risk through certified design, safe wiring, approved cable entries, correct sealing, and durable enclosure construction.
Industries use these enclosures across UAE, Saudi Arabia, Qatar, Oman, Kuwait, Bahrain, Europe, Africa, and worldwide. In the UAE, they support oilfields, refineries, offshore facilities, petrochemical plants, marine terminals, logistics zones, power plants, and industrial facilities.
The technical details below help buyers choose the correct ATEX GRP Enclosure. Always confirm exact size, Ex marking, terminal quantity, cable gland size, cable diameter range, IP rating, temperature class, and site classification before ordering.
| Specification | Details |
|---|---|
| Product Name | ATEX GRP Enclosure |
| Product Category | ATEX GRP Enclosure / Hazardous Area Enclosure |
| Product Type | GRP Terminal Box / Junction Box Enclosure |
| Main Material | Glass-fibre reinforced polyester |
| Common Use | Terminal box, junction box, field wiring enclosure, control connection enclosure |
| Protection Concepts | Ex e, Ex i, Ex tb depending on final certified configuration |
| Common Gas Area Use | Zone 1 and Zone 2 when certified accordingly |
| Common Dust Area Use | Zone 21 and Zone 22 when certified accordingly |
| Seal Type | Silicone lid seal |
| Lid Fixing | Captive screws |
| DIN Rail Fixing | Integral 4.5 mm clearance holes moulded into the body |
| Static Control Feature | Carbon-loaded low-resistance surface helps reduce static charge risk |
| Terminal Flexibility | Terminal size and quantity can be changed according to data table limits |
| Cable Entry Accessories | Ex cable glands, stopping plugs, reducers, adaptors, locknuts, sealing washers, earth tags |
| Suitable Sites | Oil & gas, refinery, petrochemical, marine, chemical, power, automation, industrial plants |
| Supplier | Atex Hub |
| Supply Region | UAE, Saudi Arabia, Qatar, Oman, Kuwait, Bahrain, Europe, Africa, Worldwide |
The reference page notes that terminal size and quantity can be changed by the end user according to data tables, and it also mentions cable diameter range for cable glands as part of product selection.
The correct GRP enclosure depends on the hazardous area classification, circuit type, terminal layout, cable entry plan, material requirement, temperature class, and certification requirement. The final assembly must match the site’s gas zone, dust zone, protection concept, and inspection requirement.
| Selection Point | What to Check |
|---|---|
| Gas Zone | Confirm whether the site requires Zone 1 or Zone 2 protection |
| Dust Zone | Confirm whether the site requires Zone 21 or Zone 22 protection |
| Protection Type | Select Ex e, Ex i, Ex tb, or another approved protection method based on final wiring design |
| Circuit Type | Confirm whether the enclosure will carry intrinsically safe or non-intrinsically safe circuits |
| Material Need | Choose GRP where chemical resistance, corrosion resistance, and lightweight construction matter |
| IP Rating | Confirm the required IP rating after cable gland and stopping plug installation |
| Cable Entries | Confirm gland size, thread type, entry quantity, and cable diameter range |
| Terminals | Confirm terminal type, current rating, voltage rating, and earth terminal requirement |
| Internal Space | Keep enough space for wiring bend radius, terminal clearance, and inspection access |
| Static Control | Confirm the project requirement for low surface resistance and static charge control |
A GRP enclosure can be used for intrinsically safe circuit applications only when the complete assembly uses approved Ex i components and follows the required wiring rules. The enclosure body alone does not make every circuit intrinsically safe.
For Ex Proof GRP Enclosure in UAE projects involving Ex i circuits, check these points before final selection:
This helps the enclosure support safer terminal protection for instrument loops, sensors, signal circuits, control wiring, and low-energy field connections.
Certifications help buyers choose the correct GRP enclosure for hazardous area projects. The final enclosure must match the site zone, protection concept, terminal type, cable gland system, material, IP rating, temperature class, and project specification.
Correct installation helps the ATEX GRP Enclosure maintain hazardous area safety. The installer must check the certificate, Ex marking, terminal layout, cable entry design, wiring clearance, earthing, sealing, lid fixing, and unused entries before energising the circuit.
Use trained personnel for hazardous area installation. Follow the project specification, certificate limits, manufacturer instructions, inspection requirements, and site area classification.
The ATEX GRP Enclosure gives industries a lightweight, durable, and corrosion-resistant enclosure solution for hazardous area terminal and junction applications. It supports safe wiring, cable management, terminal protection, and long-term performance in demanding industrial sites.
For UAE projects, this enclosure suits oil & gas, petrochemical, refinery, chemical, marine, power, automation, process control, logistics, and infrastructure applications. Its GRP construction, chemical resistance, mechanical strength, silicone sealing, captive screws, DIN rail mounting support, and static-control surface make it useful for hazardous area installations.
1. What is an ATEX GRP Enclosure used for?
It protects terminals, wiring, junction points, and electrical connections in hazardous gas and dust areas.
2. Is this suitable for Ex Proof GRP Enclosure in UAE projects?
Yes, it suits UAE hazardous area projects when the Ex marking, certificate, size, terminals, and cable entries match the site requirement.
3. What does GRP mean?
GRP means glass reinforced polyester, a strong non-metallic material used for corrosion-resistant industrial enclosures.
4. Why use GRP instead of metal?
GRP offers lightweight construction, chemical resistance, corrosion resistance, and good performance in harsh industrial environments.
5. Can it support intrinsically safe circuits?
Yes, it can support intrinsically safe circuits when approved Ex i terminals, barriers, wiring methods, and accessories are used.
6. Can it support Ex e applications?
Yes, it can support Ex e increased safety terminal arrangements when configured and certified correctly.
7. Can it be used in dust hazardous areas?
Yes, it can be used in dust hazardous areas when the final enclosure assembly has the correct Ex tb dust certification.
8. What sealing method is used?
The reference product notes silicone seals in the lid for clean and stable closure.
9. What should buyers check before ordering?
Buyers should check enclosure size, Ex marking, certificate, terminal quantity, cable gland size, cable diameter range, IP rating, and project specification.
10. Who supplies ATEX GRP Enclosures globally?
Atex Hub supplies ATEX GRP Enclosures across UAE, Saudi Arabia, Qatar, Oman, Kuwait, Bahrain, Europe, Africa, and worldwide.
The ATEX GRP Enclosure gives industries a rugged and corrosion-resistant solution for hazardous area terminal, junction, and field wiring applications. It helps protect electrical connections while supporting safe installation in explosive gas and dust environments.
For buyers searching for Ex Proof GRP Enclosure in UAE, this product offers strong value for oil & gas, petrochemical, refinery, chemical, marine, power, automation, logistics, and industrial projects. Its glass-fibre reinforced polyester construction, chemical resistance, mechanical strength, silicone lid seal, captive screws, DIN rail support, and low surface resistance design make it useful for demanding hazardous area applications.
Atex Hub supplies ATEX GRP Enclosures globally across UAE, Saudi Arabia, Qatar, Oman, Kuwait, Bahrain, Europe, Africa, and worldwide, helping industries source safe and compliant hazardous area enclosure solutions for Ex installations.