

If you have any questions before making a purchase chat with our online operators to get more information.
Ask An Expert
The Base Drum Heater IBDR-TSW/C is a heavy-duty heated platform designed to warm 200–220 L drums from the bottom up. By applying steady, even heat to the base, it lowers viscosity, improves pumpability, and helps you empty drums faster with less residue. A rugged plate, high-efficiency insulation, and precise temperature control keep product quality stable while saving time on every batch. Use it on its own or with a side jacket to speed heat-up. Ex (ATEX/IECEx) and industrial variants are available to suit your area classification in Dubai, Sharjah, and Abu Dhabi. Ideal for oils, waxes, resins, adhesives, syrups, and coatings. Available at Atex Hub with UAE-ready guidance on wattage, control, and safety.
A Base Drum Heater is a heated platform that sits under your drum and transfers heat straight into the product. Unlike space heaters or hot air guns, it delivers controlled, uniform warmth that protects quality and prevents hot spots. In practical terms, you set the temperature, place the drum on the heater, and allow the product to reach a target viscosity for smooth pumping, dosing, or pouring. Across the UAE—especially Dubai, Sharjah, and Abu Dhabi—teams use base drum heaters to simplify morning start-ups, night shifts, and cold storage changeovers without unsafe improvisation.
Faster pouring and pumping: Reduce viscosity for resins, oils, waxes, and syrups so lines move without strain.
Less residue and waste: Warmth at the base helps product flow out cleanly, cutting leftovers and cleaning time.
Stable dosing: Keep temperature in a tight band so flowmeters and pumps stay consistent.
Pre-conditioning for mixing: Bring cold drums to process temperature before adding to blenders or kettles.
Night/AC operations: Offset cooler warehouse conditions for reliable, repeatable transfers.
Oil & Gas / Marine: Lube oils, greases, corrosion inhibitors, and additives at ports and yards.
Chemicals & Paints: Epoxies, solvents, pigments, and binders prepared for filling and mixing lines.
Food & Pharma: Syrups, honey, and temperature-sensitive ingredients with hygienic contact surfaces.
Warehousing & Logistics: Pre-warm drums in staging areas for quick changeovers.
Maintenance & Utilities: Re-liquefy materials that thicken or crystallise during storage.
Simple and safe: Controlled heat at the source; no flames, no risky workarounds.
Higher throughput: Shorter wait times, faster decanting, and smoother pumping.
Lower total cost: Less waste in each drum and reduced cleaning effort.
UAE-fit support: Atex Hub sizes wattage, control, and (if needed) ATEX/IECEx compliance for your zone.
Scalable: Use alone or pair with a side jacket and insulated lid for rapid heat-up.
| Technical Specifications | Base Drum Heater IBDR-TSW/C |
|---|---|
| Drum Size Compatibility | 200–220 L (standard) |
| Heating Method | Electric heated base plate |
| Power Rating | 1500–2600 W (model-dependent) |
| Supply Voltage | 230 V AC, single phase |
| Temperature Control | Integrated thermostat/limiter or external controller |
| Temperature Range | Ambient to 80–90 °C (product-dependent) |
| Plate Diameter | Sized for standard 55-gal / 200 L drums |
| Insulation | High-efficiency thermal insulation under plate |
| Surface Finish | Industrial duty, wipe-clean |
| Load Capacity | Up to 500 kg (drum + product) |
| Earthing | External grounding point |
| IP Protection | IP54 or higher (model-specific) |
| Zone Suitability | Industrial or ATEX/IECEx variants (model-specific) |
| Accessories | Insulated lid, side jacket, external Ex controller |
| Documentation | Certificate, user manual, Declaration of Conformity |
| Warranty | 12 months |
ATEX Directive 2014/34/EU (EUR-Lex) – equipment for explosive atmospheres
IECEx Certified Equipment Scheme – international certification & certificate lookup
IEC 60079-0 – Explosive atmospheres—Equipment—General requirements
IEC 60079-31 – Dust ignition protection by enclosure “t”
IEC/IEEE 60079-30-1 – Electrical resistance trace heating (applicable to heated plates/blankets)
1) Can it handle plastic (HDPE) as well as steel drums?
Yes. It suits standard 200–220 L drums; confirm drum type so we match the correct temperature settings and accessories.
2) How fast will a drum heat up?
It depends on product viscosity, starting temperature, ambient conditions, and wattage. Atex Hub will size the model and estimate warm-up time.
3) Is an ATEX version available for Ex zones in Dubai?
Yes. Choose an ATEX/IECEx variant with the correct category, gas/dust group, and temperature class for your area classification.
4) Do I need a side jacket too?
For quicker results and lower heat loss, pair the base heater with a side jacket and an insulated lid.
5) Will heating reduce waste?
Typically yes. Bottom heat improves flow so more product leaves the drum, reducing residue and cleaning time.
6) How is temperature controlled?
Models include an integrated thermostat/limiter; optional external (Ex) controllers provide tighter control and alarms.
7) What support is available in the UAE?
Atex Hub provides selection help, zone/marking guidance, delivery, and after-sales support across Dubai, Sharjah, and Abu Dhabi.
For cleaner pours, faster transfers, and consistent dosing, the Base Drum Heater IBDR-TSW/C is a smart, safe upgrade. It warms from the point that matters—the drum base—to cut viscosity and waste while protecting product quality. Add a jacket and lid for even better performance. Available at Atex Hub with UAE-ready guidance for standard and ATEX/IECEx setups in Dubai, Sharjah, and Abu Dhabi.