

If you have any questions before making a purchase chat with our online operators to get more information.
Ask An Expert
The CSC-CS Series Flameproof Control Station is a tough, Ex-rated control point made for hazardous gas and dust zones. It puts Start/Stop, E-Stop, reset, selector modes, and pilot indication right at the equipment, so operators act quickly and safely. Built for Gulf sites, it handles heat, sand, humidity, and salt air across Abu Dhabi, Dubai, and Sharjah. Certified cable entries, tight IP sealing, and clear legends help the station install fast, pass audits smoothly, and last for years. Available locally at Atex Hub, it can be configured to match your process logic and site standards anywhere in the UAE.
An Atex Control Station is a compact, Ex-certified enclosure that houses push buttons, selector switches, pilot lamps, and an Emergency Stop for use in explosive atmospheres. The CSC-CS Series follows the Ex d (flameproof) concept to contain internal ignition, with options for Ex e (increased safety) and Ex t (dust) where required. This lets you place safe, intuitive controls close to pumps, fans, conveyors, skids, and valves without raising ignition risk. With IP66/67 sealing and marine-grade housings (GRP, aluminium, or SS316), the station keeps contaminants out and labels readable—ideal for outdoor and coastal sites across Abu Dhabi, Dubai, and Sharjah.
Across the UAE, the CSC-CS supports daily actions where speed and clarity matter. Use it to start/stop motors, trigger an E-Stop for immediate safe shutdown, acknowledge/reset alarms, and switch modes (Hand/Off/Auto or Local/Remote). Production teams place stations along access and escape routes for fast, intuitive action. Maintenance teams rely on jog/isolator functions for testing without opening large panels. Color-coded actuators, Arabic/English legends, and tactile, glove-friendly heads reduce errors in noisy, low-visibility areas common to refineries, terminals, utilities, and port facilities in Abu Dhabi.
Oil & Gas / Petrochemicals: wellheads, separators, dosing and metering skids, compressor shelters, tank farms.
Marine & Ports: pump rooms, jetties, loading arms, deck equipment exposed to spray and salt air.
Power & Water: desalination lines, booster stations, MCC outstations, chemical dosing rooms.
Chemical / Pharma: flammable solvent rooms, blending, filling, and packaging cells.
Food, Grain & FMCG (dust): mills, conveyors, silos, and bagging lines in classified zones.
Choose the CSC-CS for simplicity, durability, and quick deployment. SS316 or GRP fights corrosion and UV for outdoor and coastal use; IP66/67 sealing and certified Ex glands keep the enclosure tight over time. The modular layout supports the mix you need—push buttons, selector switches, pilot lamps, and E-Stops—with metric and NPT entries to match existing conduit systems. With Atex Hub support across Abu Dhabi, Dubai, and Sharjah, you get the right Ex markings, thread forms, dual-language legends, and drawings/nameplates—so submittals move fast and audits stay smooth.
| Item | Specification |
|---|---|
| Product | CSC-CS Series Flameproof Control Station (Ex-rated) |
| Protection Concepts | Ex d (flameproof); options Ex e (increased safety) and Ex t (dust) as part of the assembly |
| Zones / Groups | Gas: Zone 1 & 2 (IIB/IIC) · Dust: Zone 21 & 22 (IIIC) |
| Typical Ex Marking | II 2G Ex db eb IIC T6 Gb · II 2D Ex tb IIIC T80°C Db (per configuration) |
| Enclosure Materials | GRP / Powder-coated aluminium / SS316, corrosion-resistant hardware |
| Ingress / Impact | Up to IP66/67 (IEC 60529); IK rating per enclosure/type |
| Ambient Range | −40 °C to +55/60 °C (variant dependent) |
| Electrical Ratings | Typical contacts AC-15: 230 V / 3 A, DC-13: 24 V / 2 A (contact block dependent) |
| Operators | Momentary/maintained push buttons, E-Stop (mushroom, twist-release), selector switches, pilot lamps |
| Contacts | 1NO/1NC standard; options 2NO/2NC (multiple blocks per operator, model dependent) |
| Cable Entries | M20/M25/M32 or ½″/¾″ NPT; certified reducers/stopping plugs |
| Mounting | Wall/panel mount; internal earth; stainless fixings |
| Accessories | Legend/tag plates (AR/EN), padlock hasps, guards, sealing washers |
| Compliance | ATEX/IECEx aligned; exact Ex code on supplied nameplate/datasheet |
1) What does “flameproof (Ex d)” mean in a control station?
It means the enclosure contains any internal ignition, so flames or hot gases cannot ignite the outside atmosphere—vital for Abu Dhabi’s hazardous areas.
2) Can I add an Emergency Stop?
Yes—mushroom E-Stop with twist-to-release is available. Select contact blocks to match your safety loop and risk assessment.
3) Do you provide Arabic/English legends and nameplates?
Absolutely. Dual-language legends and clear pictograms improve operator clarity and reduce inspection delays across the UAE.
4) Which enclosure suits coastal Abu Dhabi sites?
SS316 or GRP offer strong resistance to salt air and UV, ideal for ports, jetties, and shoreline facilities.
5) What IP rating should I choose outdoors?
With approved Ex glands and seals, the station achieves IP66/67. Re-torque and inspect seals during preventive maintenance.
6) How many contacts can each operator have?
Most builds support multiple contact blocks (e.g., 1NO/1NC or 2NO/2NC). Confirm I/O early to size the enclosure correctly.
7) Where can I buy the CSC-CS Series in the UAE?
From Atex Hub, with local configuration support and fast documentation across Abu Dhabi, Dubai, and Sharjah.
The CSC-CS Series Flameproof Control Station delivers safe, simple, and durable local control in hazardous areas across Abu Dhabi and the UAE. Configurable to your process, easy to install and maintain, and built for Gulf conditions, it reduces downtime and speeds audits. With strong ATEX/IECEx credentials, high IP protection, and full documentation from Atex Hub, it’s a dependable choice for plants in Abu Dhabi, Dubai, and Sharjah that need Atex Control Stations that just work.