

If you have any questions before making a purchase chat with our online operators to get more information.
Ask An Expert
The Atex Switch Series EFS is a tough, Ex-rated isolation/control box designed for reliable switching and safe isolation in hazardous gas and dust zones. It gives operators a clear, padlockable handle and crisp ON/OFF indication for motors, heaters, and local energy isolation—right where the work happens. With corrosion-resistant housings, high ingress protection, and Ex-compatible cable entries, the EFS performs day after day in the UAE’s heat, dust, humidity, and salt air across Dubai, Sharjah, and Abu Dhabi. If you want a control box that installs fast, passes audits, and lasts, choose the Atex Switch Series EFS—your dependable Atex Control Box in UAE, supplied locally by Atex Hub.
An Atex control box is a sealed enclosure that houses certified switching components to operate safely in or near explosive atmospheres. The EFS Series combines an Ex-certified isolator (switch-disconnector) with robust enclosures and terminals engineered to control arcing, temperature rise, and enclosure integrity in classified zones. Unlike ordinary switches, the EFS is built for Ex d / Ex e / Ex t protection concepts and uses Ex cable glands and earth bonding to maintain the safety path from gland entry to terminal. In the UAE, equipment must survive strong UV, wind-blown dust/sand, washdowns, and coastal air. EFS tackles this with 316 stainless steel or GRP bodies, UV-stable finishes, sealed shafts, and IP66/67 gaskets—so labels stay readable, switching stays smooth, and inspections remain straightforward across Dubai, Sharjah, and Abu Dhabi.
Across the UAE, the EFS Series is the everyday choice for local isolation and emergency switching. Use it as a motor isolator next to pumps and fans, a line-of-sight disconnect for skids and conveyors, or as a maintenance lock-off point during service. In process areas, teams rely on EFS to de-energize heaters, lighting circuits, and small panels before opening enclosures. The padlockable handle and door interlock options reduce the risk of accidental re-energization. Clear ON/OFF markings, Arabic/English legends, and high-visibility handles make operation intuitive—even with gloves in low-light or noisy environments common in Dubai, Sharjah, and Abu Dhabi.
Oil & Gas / Petrochemicals: Local motor isolation on pump skids, separators, and compressor shelters; safe lock-off for chemical dosing and heater circuits.
Marine & Ports: Isolation for pump rooms, fuel transfer, and deck machinery exposed to spray, vibration, and salt air—demanding sealed, corrosion-resistant boxes.
Utilities & Water: Chlorination rooms, MCC outstations, and remote kiosks where a visible, lockable isolator boosts maintenance safety.
Food, Pharma & Chemical: Powder/solvent areas where cleanable surfaces, clear legends, and Ex compliance support audits.
Industrial & Warehousing: HVAC fans, conveyors, mixers, and battery-charging zones that require point-of-use isolation in classified locations.
Choose EFS for safety, durability, and fast deployment. The switch-disconnector offers positive isolation with a padlock able, defect-to-safe handle. Enclosures in 316 stainless steel or GRP resist corrosion and UV; metric or NPT entries match existing conduit; IP66/67 sealing keeps out water and dust. Inside, a tidy terminal layout speeds wiring and visual checks. With Atex Hub support, you get the correct Ex markings, thread forms, dual-language legends, and drawings/nameplates tailored to UAE standards—so submittals move faster and audits go smoothly in Dubai, Sharjah, and Abu Dhabi. Standardizing on EFS reduces engineering time, simplifies spares, and delivers a consistent safety practice across sites.
| Item | Specification |
|---|---|
| Model | Atex Switch Series EFS (Ex isolator/control box) |
| Protection Concepts | Ex d (flameproof), Ex e (increased safety), Ex t (dust) – variant dependent |
| Enclosure Materials | 316 stainless steel or GRP; corrosion-resistant hardware, UV-stable finish |
| Ingress Protection | Up to IP66/IP67 with approved Ex glands |
| Rated Operational Voltage | Typical 230/400 VAC (50/60 Hz); 24/48 VDC options (model dependent) |
| Current Ratings | 16 A / 25 A / 32 A / 63 A (higher on request; model dependent) |
| Poles / Switching Duty | 2P / 3P / 4P; AC-23A / AC-21A categories (model dependent) |
| Handle / Interlock | Padlockable handle (0-3 locks); door interlock and defeat key options |
| Cable Entries | M20/M25 or ½″/¾″ NPT; stopping plugs; earth/PE bar |
| Ambient Temperature | −40 °C to +55 °C (variant dependent) |
| Markings & Legends | Arabic/English legends; ISO/IEC symbols; engraved or laser nameplates |
| Accessories | Auxiliary contacts, neutral/earth bars, drain/breather, sun-shade, mounting plate |
| Compliance | ATEX/IECEx aligned; exact Ex code on supplied label/datasheet |
1) Ex d vs Ex e—how do I choose?
Ex d contains internal ignition; Ex e increases safety by preventing arcs. Selection depends on zone, gas group, load type, and your risk assessment.
2) Can I padlock the switch in OFF?
Yes—EFS provides a padlock able handle (often 0–3 locks) to maintain lock-out/tag-out during maintenance.
3) What switching duty should I specify?
For motors, choose AC-23A (motor load) where available; for resistive loads or isolation only, AC-21A may suffice. Confirm with your load profile.
4) Is it suitable for coastal Abu Dhabi and Dubai?
Yes—specify 316 SS, IP66/67 glands, and optional sun-shade/drain breather for long life in salt-spray environments.
5) Are auxiliary contacts available?
Yes—add aux contacts for remote indication (ON/OFF) to your DCS/PLC or interlock schemes.
6) Can I get metric and NPT entries?
Yes—M20/M25 and ½″/¾″ NPT options, plus certified reducers/adapters while maintaining Ex/IP integrity.
7) Where should I mount the isolator?
Install within line-of-sight of the equipment, at ergonomic height, and along access/escape routes, following your HSE plan and local codes.
The Atex Switch Series EFS delivers positive isolation, durability, and Ex compliance for hazardous areas throughout Dubai, Sharjah, and Abu Dhabi. With padlock able handles, robust enclosures, and UAE-ready sealing, it simplifies installation, speeds inspections, and protects people and assets. Backed by Atex Hub, your trusted source for an Atex Control Box in UAE, the EFS helps you standardize safely—today and for years to come.