Atex Certified Cable Gland in UAE | Atex Cable Gland in Dubai

Getting cable entries right is essential in hazardous sites. The Atex Cable Gland RAD for Armoured Cable gives you safe, sealed, and audit-ready terminations across the UAE—Dubai, Sharjah, and Abu Dhabi. It grips SWA/AWA Armor securely, maintains earth continuity, and keeps dust, water, and gases out. With corrosion-resistant metals, high-quality seals, and Ex markings you can trust, the RAD helps teams finish installs fast and pass inspections with confidence. This product is available locally at Atex Hub.

what is Atex Certified Cable Gland in UAE

An Atex certified Cable Gland is a tested device that secures and seals a cable where it enters Ex equipment while preserving the protection concept—Ex d (flameproof), Ex e (increased safety), or Ex tb (dust). In simple words, it’s the safe “doorway” your cable passes through. The RAD for Armoured Cable adds positive Armor clamping for SWA/AWA cables, delivering mechanical strength and dependable earthing. In Dubai, Sharjah, and Abu Dhabi, it helps you meet Zone 1/2 (gas) and Zone 21/22 (dust) requirements, survive Gulf weather, and reduce rework during shutdowns.

key uses of Atex Certified Cable Gland in UAE

Terminate armoured cables into Ex-rated junction boxes, motors, beacons, instruments, and control panels.
Maintain IP66/68 sealing against sand, salt spray, humidity, and washdowns in coastal and desert sites.
Bond Armor for earth continuity, ensuring faults clear safely and audits stay simple.
Match mixed threads (Metric, NPT, BSP) during brownfield tie-ins and upgrades.
Shrink install time with clear markings, wide clamping ranges, and installer-friendly accessories.
Across Jebel Ali (Dubai), Hamriyah Free Zone (Sharjah), and Mussafah/Ruwais (Abu Dhabi), RAD glands keep entries tight and compliant.

key applications

Oil & Gas / LNG: analyser houses, compressor shelters, tank farms, loading bays.
Petrochemical / Chemical: field JBs, MCCs, skid packages, dosing and pump panels.
Marine & Offshore: deck lighting, winch controls, alarms/beacons, helideck systems.
Power & Utilities: turbine enclosures, fuel-gas trains, substations, water treatment.
Dust Zones (Food, Pharma, Cement): mills, conveyors, bagging lines (Zone 21/22).

Why choose Atex Certified Cable Gland in UAE

Choose the RAD for three clear wins: compliance, durability, and speed. Compliance comes from ATEX/IECEx approvals, traceable markings, and correct Ex concepts that simplify inspections. Durability comes from 316L stainless steel or nickel-plated brass, plus elastomers matched to heat and media. Speed comes from broad clamping ranges, common thread options, and neat accessories that deliver repeatable results. With Atex Hub nearby, you get the exact sizes and threads your cable schedule needs—fast.

Technical Specifications of Atex Cable Gland

Parameter	Specification
Series	Atex Cable Gland RAD for Armoured Cable (SWA/AWA)
Certification (typical)	ATEX & IECEx, Equipment Group II (Gas & Dust)
Protection Concepts	Ex d, Ex e, Ex tb (model-dependent)
Zones / Groups	Zone 1 & 2 (Gas); Zone 21 & 22 (Dust); Gas IIA/IIB/IIC; Dust IIIC
Ingress Protection	IP66 / IP68 when installed to specification
Cable Types	Armoured SWA/AWA, circular single/multicore
Armor Termination	Positive mechanical clamping; verified earth continuity
Cable OD Range	Approx. 10–90 mm (size-dependent)
Thread Options	Metric (M20–M63), NPT (½”–2″), BSPP/BSPT (G/R)
Body Materials	316/316L stainless steel, nickel-plated brass (aluminium on request)
Seal Materials	NBR, FKM (Viton®), EPDM, PTFE (per media/temperature)
Temperature Range	-40°C to +105/120°C (check seal and T-class)
T-Class (typical)	Up to T4/T6 depending on model and conditions
Accessories	Shrouds, earth tags, locknuts, entry thread seals, reducers/adaptors
Marking	Laser-etched Ex code, size, batch traceability

Certifications, Compliance & Standards

FAQs

1) What makes the RAD gland “Atex certified”?
It’s tested under ATEX/IECEx so the gland and entry will not become an ignition source when installed as specified.

2) Is RAD only for armoured cables?
Yes. It’s optimized for SWA/AWA Armor clamping and dependable earthing. Use the matching unarmoured type for non-armoured cables.

3) Which thread should I pick for UAE projects?
New builds favour Metric. Brownfield gear may require NPT or BSP. RAD supports all three for easy matching.

4) How do I keep IP66/68 after installation?
Fit the specified seals, add thread washers where required, and torque to the manufacturer’s values.

5) Is 316L stainless worth it near the coast?
Yes—316L resists salt spray and frequent washdowns around Dubai and Abu Dhabi coastal sites.

6) What seals and T-class should I choose?
Match ambient and process heat. Select NBR/FKM/EPDM/PTFE and confirm T-class against your site dossier.

7) Where can I buy in Dubai, Sharjah, and Abu Dhabi?
From Atex Hub, with UAE stock, quick delivery, and help mapping sizes to your cable OD list and thread plan.

Conclusion

The Atex Cable Gland RAD for Armoured Cable gives you safe, durable, and compliant cable entries across the UAE. It locks Armor, seals against dust and water, and preserves Ex protection from Dubai to Sharjah to Abu Dhabi. With broad size ranges, common threads, and recognized certifications, RAD helps you finish entries right the first time. For local stock and fast selection support, choose Atex Hub.