ATEX Cable Entry Frame in UAE | ATEX Cable Entry Frame Dubai
The ATEX Split Cable Entry Frame – KEL Series is a centrally split cable entry frame designed for routing pre-terminated cables through enclosures, control panels, junction boxes, and machine housings. It helps installers pass cables with connectors through a panel cut-out without removing the connector, which saves time during installation, retrofit, repair, and maintenance work.
For companies searching for ATEX Cable Entry Frame in UAE, this product suits ATEX cable entry systems, explosion proof cable entry systems, flame proof cable entry systems, hazardous area cable entry systems, and intrinsically safe cable entry systems search requirements. It supports cable entry, strain relief, sealing, cable routing, control panel wiring, machine wiring, and enclosure cable management in industrial environments.
Atex Hub supplies cable entry frames and hazardous-area cable entry solutions globally across UAE, Saudi Arabia, Qatar, Oman, Kuwait, Bahrain, Europe, Africa, and worldwide, helping industries source suitable cable entry products for panels, enclosures, junction boxes, machines, and industrial systems.
What Is ATEX Split Cable Entry Frame – KEL Series?
The ATEX Split Cable Entry Frame – KEL Series is a split cable entry system used for routing cables with connectors through an enclosure wall or panel plate. The frame opens into two parts, allowing the installer to place matching cable grommets around the cables before fitting them into the cable entry frame. This design helps keep pre-assembled connectors intact during installation. The KEL range is described as a centrally split cable entry frame for cables with connectors, with IP54 and UL Type 12 ratings.
The system uses slit grommets that match the cable diameter. The grommet is placed around the cable and inserted into the split frame. The KEL frame sizes match common cut-out dimensions used for 10-pin, 16-pin, and 24-pin standard industrial connectors, with cut-out height options of 36 mm or 46 mm depending on the routed cables.
The KEL Series also supports high cable density. Extended versions based on KEL 16 and KEL 24 can route up to 120 cables or hoses when used with additional middle frames. A flat rubber gasket comes with the frame, and mounting options include screw-type mounting or snap-in mounting with a compatible snap mounting frame.
Important Note: The KEL Series is an industrial cable entry frame with listed IP54 / UL Type 12 performance. For hazardous-area or ATEX panel projects, the complete enclosure assembly, cable entry system, grommets, installation method, and site approval must be checked by the project engineer or Ex inspector before use.
Key Features of ATEX Cable Entry Frame Systems
The KEL Series split cable entry frame gives control panel builders and maintenance teams a practical way to route cables with connectors into enclosures. It supports cable sealing, strain relief, cable density, fast maintenance, and retrofit work without cutting or re-terminating pre-assembled cables.
- Ideal for ATEX Cable Entry Frame in UAE
- Suitable for ATEX Cable Entry Systems search requirements
- Supports Explosion Proof Cable Entry Systems search intent for Ex-area panel accessories
- Suitable for Flame Proof Cable Entry Systems where the complete enclosure approval allows use
- Supports Hazardous Area Cable Entry Systems for approved industrial enclosure projects
- Can support Intrinsically Safe Cable Entry Systems when used with approved low-energy circuits and compliant enclosure design
- Product type: centrally split cable entry frame
- Designed for cables with connectors
- Protection rating: IP54
- UL enclosure rating: UL Type 12
- Flame class: UL94-V0, self-extinguishing
- Operating temperature: -40°C to +140°C
- Material: polyamide
- Mounting options: screw-type mounting or snap-in with KEL-SNAP
- Properties include vibration proof, silicone free, halogen free, and UV resistant
- V2A versions provide anti-corrosive performance
- Supports strain relief according to EN 62444
- Helps retain warranty on pre-terminated cables
- Supports easier retrofit, repair, and maintenance work
- Supports high cable density with a wide range of grommets
The product specifications list IP54, UL Type 12, UL94-V0, -40°C to +140°C, polyamide, screw-type or snap-in mounting, vibration-proof construction, silicone-free material, halogen-free material, and UV resistance.
Applications of Cable Entry Systems
The ATEX Split Cable Entry Frame – KEL Series helps route cables with connectors into industrial enclosures, control cabinets, machines, and junction boxes. It suits locations where installers need fast cable entry, organised cable routing, sealed pass-through, and easy maintenance access.
- Control Panel Construction – Panel builders use cable entry frames to route pre-terminated cables into control cabinets without removing connectors.
- Automation and Robotics – Machine builders use split cable entry systems for servo cables, sensor cables, actuator cables, communication cables, and pre-assembled wiring.
- Oil & Gas Panels – Project teams can use cable entry frames in approved enclosure designs for auxiliary panels, instrument panels, monitoring cabinets, and control systems where the complete assembly meets site requirements.
- Petrochemical Plants – Cable entry systems support wiring routes for industrial panels, skids, utility systems, and process automation equipment.
- Hazardous Area Enclosures – The frame can form part of a hazardous-area cable entry layout only when the full enclosure, sealing, certification, and inspection requirements allow it.
- Retrofit and Maintenance Work – Technicians can route or replace pre-terminated cables more easily because the split design avoids connector removal.
- Machine Building – The KEL Series supports cable entry through machine housings, electrical panels, base plates, and modular equipment.
- Industrial Communication Systems – Teams use split cable entry frames for cables with connectors, data cables, signal cables, bus cables, and control cables.
- UAE Industrial Projects – It suits Dubai, Abu Dhabi, Sharjah, Ajman, Fujairah, Ras Al Khaimah, Umm Al Quwain, Jebel Ali, KIZAD, Hamriyah Free Zone, DIP, ports, utilities, factories, workshops, warehouses, and infrastructure projects.
- High Cable Density Panels – Extended KEL versions can support dense cable routing where many cables or hoses need entry through one panel area.
Technical Specifications
| Specification | Details |
|---|
| Product Name | ATEX Split Cable Entry Frame – KEL Series |
| Product Type | Split Cable Entry Frame / Cable Entry System |
| Main Use | Routing cables with connectors through enclosures and panels |
| Frame Design | Centrally split cable entry frame |
| IP Rating | IP54 |
| UL Type Rating | UL Type 12 |
| Flame Class | UL94-V0, self-extinguishing |
| Operating Temperature | -40°C to +140°C |
| Material | Polyamide |
| Mounting Options | Screw-type mounting, snap-in with KEL-SNAP |
| Properties | Vibration proof, silicone free, halogen free, UV resistant |
| Anti-Corrosive Option | V2A versions |
| Strain Relief | According to EN 62444 |
| Gasket | Flat rubber gasket included |
| Connector Cut-Out Match | 10-pin, 16-pin, and 24-pin standard industrial connector cut-outs |
| Cut-Out Height Options | 36 mm or 46 mm |
| High-Density Routing | Up to 120 cables or hoses with extended versions and middle frames |
| Supplier | Atex Hub |
The KEL Series specifications include IP54, UL Type 12, UL94-V0, -40°C to +140°C, polyamide material, and mounting by screw or snap-in frame.
Product Types and Size Options
The KEL Series includes multiple frame types for different cable counts, connector cut-outs, cable diameters, and panel layouts. This helps project teams select the correct cable entry frame based on available panel space, number of cables, grommet type, and installation method.
- KEL 24 – Suitable for larger panel cut-outs and higher cable entry capacity.
- KEL 24-E – Extended frame design for increased cable routing options.
- KEL 24-MT / KEL 24-2MT – Extended frame versions for higher routing density.
- KEL 16 – Suitable for medium-size panel cut-outs and industrial connector layouts.
- KEL 16-E – Extended version for additional routing space.
- KEL 16-MT / KEL 16-2MT – Designed for higher cable entry density.
- KEL 10 – Suitable for smaller connector cut-out requirements.
- KEL-B – Matches 46 × 46 mm measuring instrument cut-out dimensions.
The listed product types include KEL 24, KEL 24-E, KEL 24-MT, KEL 24-2MT, KEL 16, KEL 16-E, KEL 16-MT, KEL 16-2MT, KEL 10, and KEL-B.
Cable Entry Frame Selection Guide
The correct ATEX Cable Entry Frame in UAE depends on enclosure type, cable count, connector size, cable diameter, IP requirement, mounting method, material requirement, and hazardous-area approval.
| Selection Point | What to Check |
|---|
| Cable Type | Confirm cables have pre-assembled connectors |
| Cable Diameter | Match each cable with the correct slit grommet |
| Connector Cut-Out | Check 10-pin, 16-pin, 24-pin, or measuring instrument cut-out |
| IP Requirement | Confirm whether IP54 suits the project |
| UL Requirement | Confirm whether UL Type 12 suits the enclosure design |
| Cable Density | Select KEL 10, KEL 16, KEL 24, or extended versions based on cable count |
| Mounting Method | Choose screw-type mounting or snap-in mounting |
| Corrosion Requirement | Select V2A version for anti-corrosive screw options |
| Strain Relief | Confirm strain relief according to EN 62444 |
| Hazardous Area Use | Confirm complete enclosure certification and Ex inspection before use |
| Maintenance Need | Use split design where retrofit and cable replacement matter |
| Compliance | Confirm datasheet, enclosure approval, cable routing method, IP rating, and site classification before procurement |
Why Split Cable Entry Design Matters
A split cable entry frame saves time because installers do not need to cut, strip, or re-terminate connectorised cables. The frame opens, the matching slit grommet fits around the cable, and the assembly routes into the enclosure cut-out.
This matters in automation panels, control cabinets, instrument enclosures, machine housings, and industrial junction boxes. It helps protect pre-terminated cables and can help maintain the warranty on pre-assembled cable systems. The product benefits specifically highlight that the warranty on pre-terminated cables remains.
Why IP54 and UL Type 12 Matter
IP54 protection helps guard against dust ingress and water splashing. UL Type 12 supports indoor industrial enclosure protection against dust, dirt, and dripping non-corrosive liquids. These ratings make the frame useful for many industrial panels, automation cabinets, machine enclosures, and indoor control systems.
For hazardous-area projects, IP rating alone is not enough. The complete enclosure, sealing arrangement, cable entry system, grommets, accessories, and installation method must match the site’s Ex classification and certification requirement.
Why Strain Relief According to EN 62444 Matters
Cable entry systems should not only route cables; they should also help hold them securely. Strain relief protects cable connections from pulling force, vibration, cable movement, and panel maintenance activity.
The KEL Series lists strain relief according to EN 62444 as one of its benefits. This makes it useful for control cabinets, machine panels, automation systems, and industrial enclosures where cable movement and vibration can affect connections.
Why High Cable Density Matters
Modern control panels often contain many cables for sensors, actuators, power, data, communication, and control. A high-density cable entry system helps route many cables through a smaller enclosure area.
The KEL Series supports high cable density through a wide variety of grommets, including double and quadruple grommet arrangements. Extended versions based on KEL 16 and KEL 24 can route up to 120 cables or hoses.
Why Material and Flame Class Matter
The KEL Series uses polyamide material and carries UL94-V0 self-extinguishing flame class. This supports industrial cable entry use where flame-retardant material performance matters. The system also lists silicone-free, halogen-free, UV-resistant, and vibration-proof properties.
For UAE industrial sites, material performance matters because panels may face heat, vibration, dust, outdoor exposure, oilfield conditions, workshop handling, and long service periods. Project teams should select the correct frame, gasket, grommet, screw material, and enclosure design based on the real installation environment.
ATEX Cable Entry and Hazardous Area Cable Entry Guide
Many buyers use ATEX cable entry systems, explosion proof cable entry systems, flame proof cable entry systems, hazardous area cable entry systems, and intrinsically safe cable entry systems together. However, each term can describe a different enclosure entry requirement or protection method.
| Term | Meaning |
|---|
| ATEX Cable Entry Systems | Cable entry products selected for use with Ex-rated enclosure systems where approval allows |
| Explosion Proof Cable Entry Systems | Cable entry systems used in hazardous-area enclosure applications |
| Flame Proof Cable Entry Systems | Cable entry systems selected for flameproof or Ex-rated enclosure projects |
| Hazardous Area Cable Entry Systems | Cable entry solutions used in classified industrial environments |
| Intrinsically Safe Cable Entry Systems | Cable entry systems used with approved low-energy Ex i wiring and enclosures |
| Split Cable Entry Frame | Frame used to route pre-terminated cables without removing connectors |
| Cable Grommet System | Grommet-based system that seals cables inside a cable entry frame |
| Control Panel Cable Entry | Cable routing method for industrial panels, enclosures, and machine housings |
This difference matters in UAE projects because consultants, EPC contractors, safety teams, and inspectors may ask for a specific protection method. Always confirm whether the project needs ATEX certification, Ex enclosure approval, IP54, UL Type 12, EN 62444 strain relief, UL94-V0, split cable entry, or intrinsically safe wiring selection.
Installation & Usage Notes
Correct installation helps the ATEX Split Cable Entry Frame – KEL Series perform safely and reliably. The installer must check cable diameter, grommet selection, cut-out size, gasket placement, mounting method, screw type, enclosure material, cable strain relief, and site approval before installation.
- Select the correct ATEX Cable Entry Frame in UAE based on cable count and enclosure cut-out.
- Match every cable with the correct slit grommet diameter.
- Use the correct frame size for 10-pin, 16-pin, 24-pin, or measuring instrument cut-outs.
- Use screw-type mounting or snap-in mounting according to project design.
- Fit the flat rubber gasket correctly to support sealing.
- Confirm whether standard screws or stainless steel V2A screws suit the environment.
- Maintain strain relief according to project requirements.
- Do not damage pre-terminated cable connectors during routing.
- Confirm whether IP54 and UL Type 12 meet the enclosure requirement.
- For hazardous-area projects, check the full enclosure approval before use.
- Inspect grommets, frame alignment, gasket compression, screw tightening, cable support, and enclosure sealing after installation.
- Test panel integrity, cable continuity, earthing, cable route strain, and enclosure sealing before handover.
Certifications, Standards & Compliance
Certifications and standards help buyers select the correct cable entry frame for industrial and hazardous-area projects. The final selection must match the enclosure design, site classification, IP requirement, cable type, strain relief requirement, and inspection standard.
The KEL Series product data lists IP54 according to EN 60529, UL Type 12 according to UL 50E, UL94-V0 self-extinguishing flame class, and strain relief according to EN 62444.
- ATEX Directive – Supports equipment and protective systems selected for explosive atmosphere applications.
- IECEx Certification System – Supports international certification for equipment used in explosive atmospheres.
- IECEx Explosion Protection Concepts – Supports understanding of Ex protection methods used in hazardous-area equipment and enclosure systems.
- EN 60529 / IP Code – Supports ingress protection ratings such as IP54.
- UL 50E Enclosure Rating – Supports enclosure environmental construction requirements, including UL Type ratings.
- UL94 V-0 Flame Class – Supports flame-retardant material performance for plastic components.
- EN 62444 Strain Relief Requirement – Supports cable gland and cable entry strain relief testing and performance.
- Project Compliance Check – Always confirm datasheet, enclosure approval, Ex certification, grommet selection, IP rating, cable strain relief, and site classification before procurement.
Why Choose This Cable Entry Frame
The ATEX Split Cable Entry Frame – KEL Series gives industries a practical cable routing solution for pre-terminated cables. It supports centrally split frame design, IP54, UL Type 12, UL94-V0, -40°C to +140°C, polyamide material, screw or snap-in mounting, high cable density, vibration resistance, UV resistance, halogen-free construction, and strain relief according to EN 62444.
For UAE projects, this cable entry frame suits automation, control panels, machine building, industrial enclosures, utilities, factories, warehouses, workshops, process plants, ports, skids, maintenance panels, and infrastructure applications. Its split design, wide grommet compatibility, space-saving shape, and retrofit-friendly installation make it useful for demanding cable entry and cable management work.
- Ideal for ATEX Cable Entry Frame in UAE
- Suitable for ATEX Cable Entry Systems
- Supports Explosion Proof Cable Entry Systems search intent for Ex enclosure accessory pages
- Suitable for Flame Proof Cable Entry Systems when approved within the full enclosure design
- Supports Hazardous Area Cable Entry Systems for properly assessed industrial installations
- Can support Intrinsically Safe Cable Entry Systems when used with approved Ex i circuits and enclosures
- Useful for control panels, enclosures, machine housings, automation systems, and retrofit cable routing
- Supplied globally by Atex Hub
Frequently Asked Questions
1. What is ATEX Split Cable Entry Frame – KEL Series used for?
It routes pre-terminated cables through enclosures and control panels without removing the cable connectors.
2. Is this suitable for ATEX Cable Entry Frame in UAE projects?
Yes, it can suit UAE industrial projects, but hazardous-area use must be confirmed with the complete enclosure approval and site classification.
3. What IP rating does the KEL Series provide?
The KEL Series provides IP54 protection.
4. What UL enclosure rating does it carry?
The product data lists UL Type 12.
5. What material does the frame use?
The frame uses polyamide material.
6. What operating temperature range does it support?
It supports -40°C to +140°C operating temperature.
7. Does it support strain relief?
Yes, the KEL Series supports strain relief according to EN 62444.
8. Can it route many cables through one frame?
Yes, extended versions with middle frames can route up to 120 cables or hoses.
9. Where can it be used in the UAE?
It suits Dubai, Abu Dhabi, Sharjah, Ajman, Fujairah, Ras Al Khaimah, Umm Al Quwain, Jebel Ali, KIZAD, Hamriyah Free Zone, DIP, ports, utilities, factories, workshops, warehouses, and infrastructure sites.
10. Who supplies cable entry frames globally?
Atex Hub supplies cable entry frames and hazardous-area cable entry solutions across UAE, Saudi Arabia, Qatar, Oman, Kuwait, Bahrain, Europe, Africa, and worldwide.
Conclusion
The ATEX Split Cable Entry Frame – KEL Series gives industries a practical and time-saving cable entry solution for pre-terminated cables. It supports centrally split cable routing, IP54, UL Type 12, UL94-V0, polyamide material, -40°C to +140°C operating temperature, screw or snap-in mounting, high cable density, and strain relief according to EN 62444.
For buyers searching for ATEX Cable Entry Frame in UAE, this product offers strong value for control panels, machine building, automation systems, industrial enclosures, retrofit work, maintenance panels, utility systems, factories, workshops, warehouses, ports, and infrastructure projects. For hazardous-area or Ex enclosure applications, the complete enclosure assembly and site approval must confirm suitability before installation.
Atex Hub supplies KEL Series split cable entry frames and other cable entry systems globally across UAE, Saudi Arabia, Qatar, Oman, Kuwait, Bahrain, Europe, Africa, and worldwide, helping industries source suitable cable entry and enclosure accessory products.
