
Keep people and equipment safe in cold, hazardous areas. Atex Air Warmers FAW deliver controlled warm air inside classified zones without adding ignition risk. The compact, robust design pushes heat exactly where you need it—instrument racks, small shelters, control rooms, enclosures, or skids—so electronics stay within spec and operators stay comfortable. You get fast start-up, reliable temperature control, and a sealed build that resists dust, moisture, and chemicals. Set it, secure it, and keep your process stable through seasonal drops or night shifts. Available at Atex Hub.
what is Atex Air Warmers
Atex Air Warmers are electric space heaters built for explosive atmospheres. They raise ambient temperature by drawing air across protected heating elements and directing it back into the space. Unlike ordinary heaters, FAW units use ATEX-compliant components, sealed terminals, certified cable entries, and rugged enclosures to contain ignition sources. Integrated over-temperature protection and optional thermostats keep heat steady and safe. Use them as primary heat in small rooms, or as anti-condensation and anti-frost devices in cabinets and panels. With simple mounting and service-friendly access, FAW air warmers fit into new builds and retrofits with minimal disruption.
key uses of Atex Air Warmers
Deploy Atex Air Warmers wherever cold threatens quality or uptime. Prevent condensation on PLCs and MCCs, stop sensor drift in analyser shelters, and protect battery rooms from low-temperature trips. In storage, reduce moisture to protect packaging, catalysts, and sensitive media. On skids, stabilize enclosures around pumps and valves for smoother start-ups. Maintenance teams also use FAW units as temporary heat during shutdowns or commissioning. Because the design is ATEX-certified and sealed, you can operate confidently in classified zones while meeting method statements and work permits.
key applications
FAW Atex Air Warmers serve Zone 1 & Zone 2 gas/vapor areas (and dust options where required—confirm at order). Typical applications include instrument houses, control rooms, electrical cabinets, containerized modules, pump/compressor skids, sample conditioning enclosures, and small process rooms. The coated, gasketed housing withstands chemical splash and salt-laden air. A sealed airflow path helps the unit perform in dusty or humid environments. Pair with a room thermostat for automatic set-point control, or use a panel thermostat for anti-condensation duty. Flexible mounting and cable gland options simplify integration.
Technical Specifications of Atex Air Warmers FAW
| Feature | Details |
|---|---|
| Product Name | Atex Air Warmers FAW |
| Type | ATEX electric air warmer / space heater |
| Hazardous Area | Zone 1 & Zone 2 (gas/vapor); dust variants on request |
| Protection Concept | Ex d / Ex e assemblies (model-dependent), sealed terminals |
| Wattage Range | 250 W – 3000 W (selection per heat load) |
| Supply Voltage | 110–120 V / 220–240 V / 380–415 V, 50/60 Hz (confirm at order) |
| Temperature Control | Integrated thermal cut-out; optional room/panel thermostat |
| Airflow | Quiet, industrial fan for uniform distribution |
| Operating Temp | −40 °C to +55 °C ambient (model-dependent) |
| Ingress Protection | IP65–IP66 enclosure (series/model-dependent) |
| Materials | Powder-coated steel or stainless options; epoxy finish |
| Mounting | Wall, panel, or skid mounting; gland plate options |
| Cable Entry | ATEX-certified cable glands / stopping plugs |
| Accessories | Thermostats, mounting kits, isolator, guards, filters |
| Documentation | ATEX certificate, nameplate, wiring, IOM pack |
Certifications, Compliance & Standards
ATEX Directive 2014/34/EU — Equipment for explosive atmospheres
IECEx Scheme — International conformity assessment for explosive atmospheres
EN 60079 (series) — Explosive atmospheres (e.g., equipment protection by enclosure, wiring, installation)
EN/IEC 60529 — Degrees of protection (IP code)
ISO 9001 — Quality management systems
why choose Atex Air Warmers
Choose Atex Air Warmers FAW when you want safe heat and simple integration. You get certified protection for hazardous zones, steady airflow for even warmth, and robust enclosures that stand up to real sites. The wattage range covers anti-condensation up to room heating. Thermostat options help you save energy and hold temperature tight. Cable glands, isolators, and mounting kits make installation faster. With Atex Hub, you also get sizing support, drawings, and documentation packs that align with permits and inspection—so you install once and move on.
FAQs — Atex Air Warmers (FAW)
1) What makes FAW air warmers ATEX-compliant?
They use certified Ex assemblies, sealed terminations, and compliant glands so internal faults cannot ignite the outside atmosphere.
2) Can I use them for anti-condensation only?
Yes. Select lower wattage with a panel thermostat to keep cabinets dry and electronics stable.
3) Do they suit Zone 1 and Zone 2?
Yes. FAW models cover Zone 1 & Zone 2 (confirm gas group and T-class during selection).
4) How do I size the wattage?
Share enclosure size, insulation, ambient, and target temperature. We’ll calculate heat loss and recommend a wattage.
5) What controls are available?
Options include room thermostats for space heating and panel thermostats for cabinet duty, plus integral over-temperature cut-outs.
6) Are stainless steel versions available?
Yes. Stainless housings and hardware suit coastal or chemically aggressive sites.
7) What documents will I receive?
ATEX/IECEx certificates, nameplate data, wiring diagrams, and Installation & Operation Manuals (IOM) aligned to your method statements.
Conclusion
Atex Air Warmers FAW deliver reliable, ATEX-compliant heat in classified spaces. They protect electronics from condensation, keep rooms usable, and stabilize processes in cold conditions. With robust enclosures, smart control options, and flexible mounting, FAW units install quickly and perform day after day. For a safer, simpler way to warm hazardous-area spaces, choose FAW—available at Atex Hub.







